Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-INTEGRAL-WING-SUPPORT-01Display
Display face with integral locking wings dieline
A one-piece standing display: the face folds to a base and rear panel whose two side wings hook into slots in the back of the face. No glue; square or round top. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside210 × 110 × 297 mm
Outside213.2 × 113.2 × 300.2 mm
Flat blank411.3 × 525.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-INTEGRAL-WING-SUPPORT-01
- Inside size
- Face width 210 · Stand depth 110 · Face height 297 mm
- Size range
- Face width 80–800 · Stand depth 30–400 · Face height 100–1200 mm
- Manufacturing
- 211.6 × 111.6 × 298.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.131 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WF-fluteE-flute KB-fluteFBB 400
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-INTEGRAL-WING-SUPPORT-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Display face | 210 × 297 | L × H |
| Base | 210 × 110 | L × W |
| Rear panel | 184.8 × 118.8 | – |
| Locking wing ×2 | 113.3 × 118.8 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Face lean°
- Top2 options
- Support heightmm
- Hook widthmm
Ready-sized display face with integral locking wings presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this display face with integral locking wings yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.