Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-HANGING-PRODUCT-FRAME-01Display
Hanging open-sided product frame dieline
One continuous strip forms a base, two open faces and half-depth shoulders meeting at a reinforced two-hole header. The U-cut window material stays attached to the base as adjustable product-support flaps. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside140 × 70 × 105 mm
Outside140 × 70 × 150 mm
Flat blank140 × 530 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HANGING-PRODUCT-FRAME-01
- Inside size
- Face width 140 · Base depth 70 · Frame height 105 mm
- Size range
- Face width 60–350 · Base depth 35–250 · Frame height 45–350 mm
- Manufacturing
- 140 × 70 × 150 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.074 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Kraft 350SBS 350FBB 400SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The hanging open-sided product frame erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Set the insertfront retained support flap, front header reinforcement, back retained support flap, back header reinforcement
- 2Fold the walls upfront left rail, front right rail, back left rail, back right rail
- 3Close the lidfront half-depth shoulder, back half-depth shoulder
- 4Fold the walls upfront hanging header, back hanging header
How the blank is sized
Score-to-score panel sizes of this DM-HANGING-PRODUCT-FRAME-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 140 × 70 | L × W |
| front left rail | 35 × 105 | – × H |
| front right rail | 35 × 105 | – × H |
| front retained support flap | 70 × 119 | – |
| front half-depth shoulder | 35 × 35 | – |
| front hanging header | 140 × 45 | L × – |
| front header reinforcement | 140 × 45 | L × – |
| back left rail | 35 × 105 | – × H |
| back right rail | 35 × 105 | – × H |
| back retained support flap | 70 × 119 | – |
| back half-depth shoulder | 35 × 35 | – |
| back hanging header | 140 × 45 | L × – |
| back header reinforcement | 140 × 45 | L × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Opening widthmm
- Header heightmm
- Hanging hole diametermm
- Hanging hole spacingmm
- Support flap opening°
Ready-sized hanging open-sided product frame presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the hanging open-sided product frame dieline fit my product?
One continuous strip forms a base, two open faces and half-depth shoulders meeting at a reinforced two-hole header. The U-cut window material stays attached to the base as adjustable product-support flaps. The default dimensions in inside-size mode are Face width 140 mm, Base depth 70 mm, Frame height 105 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Face width 60–350 mm, Base depth 35–250 mm, Frame height 45–350 mm. At the default settings, the editor also exposes Opening width, Header height, Hanging hole diameter, Hanging hole spacing, Support flap opening. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is Kraft board 350 g (0.46 mm caliper). This structure allows Kraft board 350 g, SBS white board 350 g, Folding boxboard 400 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this hanging open-sided product frame yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.