Skip to content
DielineMaker
Start designing free
Inflatable start finish arch
Preview image

A 3D product preview with editable artwork placement. The downloads contain artwork areas; manufacturing patterns and hardware drawings are not included. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-EVENT-ARCH-01Apparel & merchandise

Inflatable start finish arch decoration template

Plan a branded inflatable start or finish arch with two upright tubes and a rounded crosspiece. The 5000 × 3500 mm starting arch uses 600 mm tubes; width and height are overall inflated dimensions, not clear opening sizes. Change tube diameter, elbow colour and anchor presentation. Three independent developed artwork guides cover the straight left leg, right leg and top span, with rear seam and section-join references. Curved elbows stay unprinted. These are nominal placement guides for a supplied inflatable, not sewing patterns. The supplier approves section dimensions, seam allowances, pressure, blower, ballast, tethers and wind limits. A parametric template — adjust the object dimensions and decoration area to preview your artwork at size.

Object size5000 × 3500 mm
Artwork area3440 × 1885 mm
Download the artwork templatePro
Artwork boundary preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, with the artwork area and bleed, without a watermark. See plans

Reference
DM-EVENT-ARCH-01
Object size
Overall inflated width 5000 · Overall inflated height 3500 mm
Size range
Overall inflated width 2000–10000 · Overall inflated height 1800–6000 mm
Parts
3 parts — Left upright · rear seam at chart edges, Right upright · rear seam at chart edges, Top span · rear seam at chart edges
Artwork area
16.738 m²
Good for
inflatable arch mockupinflatable start finish archrace archevent entrance archinflatable arch template

The flat artwork area

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed.

  • Artwork boundary
  • Bleed 3 mm
Inflatable start finish arch artwork boundary

Adjustable in the editor

Alongside dimensions, the template offers 3 options; the template and 3D preview follow each change.

  • Tube diametermm
  • Show tethers and ballaston / off
  • Elbow fabric4 options

Ready-sized inflatable start finish arch presets

The same model with sizes and artwork options ready to customize.

Inspired by real signage and retail projects

See where an idea can go.

Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Generated WRACK PATROL salmon-rose inflatable beach-cleanup arch with navy text, unprinted elbows and four anchored guy ropes on a sunny beach
AI-generated creative concept · WRACK PATROL
WRACK PATROL

Welcome cleanup volunteers with a warm-rose arch.

The job

  • Welcome beach-cleanup volunteers with a 5000 × 3500 mm inflatable event arch and 600 mm tubes.

Choose your starting point

Print three independent developed straight-section artwork placements. The rounded elbows stay unprinted. Overall dimensions include the tubes; clear width is 3800 mm at the starting size. Supplier dimensions, sewing, blower, inflation pressure, ballast and wind limits are separate.

Explore the actual templates

Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.

Before you choose this template

Size, materials, downloads and production checks.

Will the inflatable start finish arch decoration template fit my product?

Plan a branded inflatable start or finish arch with two upright tubes and a rounded crosspiece. The 5000 × 3500 mm starting arch uses 600 mm tubes; width and height are overall inflated dimensions, not clear opening sizes. Change tube diameter, elbow colour and anchor presentation. Three independent developed artwork guides cover the straight left leg, right leg and top span, with rear seam and section-join references. Curved elbows stay unprinted. These are nominal placement guides for a supplied inflatable, not sewing patterns. The supplier approves section dimensions, seam allowances, pressure, blower, ballast, tethers and wind limits. The default reference dimensions are Overall inflated width 5000 mm, Overall inflated height 3500 mm. Match the artwork area to your supplier’s measured print area; the displayed object dimensions do not establish production tolerances.

Can I change the size and design?

Yes. The supported ranges are Overall inflated width 2000–10000 mm, Overall inflated height 1800–6000 mm. At the default settings, the editor also exposes Tube diameter, Show tethers and ballast, Elbow fabric. Add your own artwork and preview the result in 3D. Resizing changes the model and artwork reference areas.

Does this template specify the material for the product?

Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns. Confirm the actual product material, print surface and finishing process with your supplier; a 3D appearance is not a manufacturing specification.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF artwork boundaries. Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns.

Is this decoration template free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I manufacture the product from this download?

Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns. Use the download to prepare and approve the printed components or decoration with your supplier.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All apparel & merchandise templates

Make this inflatable start finish arch yours

Set the artwork area, add your design and export the dimensioned artwork template, or stage the product in a 3D scene.