

A 3D product preview with editable artwork placement. The downloads contain artwork areas; manufacturing patterns and hardware drawings are not included. The artwork is a sample from a fictional brand — swap in your own in the editor.
Inflatable race arch 5 m decoration template
A 5 m wide, 3.5 m tall inflatable race entrance with 600 mm tubes and 3.8 m clear width. Print separate nominal tube-skin placements for both legs and the straight top span. Rounded coral elbows, rear seams, anchor tabs and ballast complete the mockup. Supplier sewing, inflation and structural approval remain separate. A ready-sized preset of the inflatable start finish arch — adjust the object dimensions and decoration area to preview your artwork at size.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, with the artwork area and bleed, without a watermark. See plans
- Reference
- DM-EVENT-ARCH-02
- Structure
- Inflatable start finish arch
- Object size
- Overall inflated width 5000 · Overall inflated height 3500 mm
- Size range
- Overall inflated width 2000–10000 · Overall inflated height 1800–6000 mm
- Parts
- 3 parts — Left upright · rear seam at chart edges, Right upright · rear seam at chart edges, Top span · rear seam at chart edges
- Artwork area
- 16.738 m²
- Good for
The flat artwork area
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed.
- Artwork boundary
- Bleed 3 mm

Adjustable in the editor
Alongside dimensions, the template offers 3 options; the template and 3D preview follow each change.
- Tube diametermm
- Show tethers and ballaston / off
- Elbow fabric4 options
The inflatable start finish arch family
The same model with sizes and artwork options ready to customize.
See where an idea can go.
Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Welcome cleanup volunteers with a warm-rose arch.
The job
- Welcome beach-cleanup volunteers with a 5000 × 3500 mm inflatable event arch and 600 mm tubes.
Choose your starting point
Print three independent developed straight-section artwork placements. The rounded elbows stay unprinted. Overall dimensions include the tubes; clear width is 3800 mm at the starting size. Supplier dimensions, sewing, blower, inflation pressure, ballast and wind limits are separate.
Explore the actual templates
Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.
Before you choose this template
Size, materials, downloads and production checks.
Will the inflatable race arch 5 m decoration template fit my product?
A 5 m wide, 3.5 m tall inflatable race entrance with 600 mm tubes and 3.8 m clear width. Print separate nominal tube-skin placements for both legs and the straight top span. Rounded coral elbows, rear seams, anchor tabs and ballast complete the mockup. Supplier sewing, inflation and structural approval remain separate. The default reference dimensions are Overall inflated width 5000 mm, Overall inflated height 3500 mm. Match the artwork area to your supplier’s measured print area; the displayed object dimensions do not establish production tolerances.
Can I change the size and design?
Yes. The supported ranges are Overall inflated width 2000–10000 mm, Overall inflated height 1800–6000 mm. At the default settings, the editor also exposes Tube diameter, Show tethers and ballast, Elbow fabric. Add your own artwork and preview the result in 3D. Resizing changes the model and artwork reference areas.
Does this template specify the material for the product?
Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns. Confirm the actual product material, print surface and finishing process with your supplier; a 3D appearance is not a manufacturing specification.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF artwork boundaries. Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns.
Is this decoration template free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I manufacture the product from this download?
Exports are nominal developed decoration placements for the straight tube sections, with rear seam and section-join references. Curved elbows are unprinted. Supplier-approved dimensions, seam allowances, sewing, inflation, blower, ballast and anchoring remain separate; these are not cutting or sewing patterns. Use the download to prepare and approve the printed components or decoration with your supplier.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this inflatable race arch 5 m yours
Set the artwork area, add your design and export the dimensioned artwork template, or stage the product in a 3D scene.





