Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-INTEGRAL-CHANNEL-TRAY-01Trays & lids
Tray with integral channel ribs dieline
A shallow tray whose floor pleats up into hollow ribs that divide it into parallel channels, all from one blank; optional attached tuck lid. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 150 × 40 mm
Outside201 × 151 × 41 mm
Flat blank280 × 358 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-INTEGRAL-CHANNEL-TRAY-01
- Inside size
- Length 200 · Width 150 · Wall height 40 mm
- Size range
- Length 60–600 · Width 50–500 · Wall height 10–200 mm
- Manufacturing
- 200.5 × 150.5 × 40.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.084 m² · about 3 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350E-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-INTEGRAL-CHANNEL-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Channel floor 1 | 200 × 44.7 | L × – |
| End wall ×6 | 40 × 44.7 | H × – |
| Rib wall ×4 | 200 × 32 | L × – |
| Front | 200 × 40 | L × H |
| Glue flap ×4 | 38 × 12 | – |
| Rib top ×2 | 200 × 8 | L × – |
| Channel floor 2 | 200 × 44.7 | L × – |
| Channel floor 3 | 200 × 44.7 | L × – |
| Back | 200 × 40 | L × H |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Form2 options
- Channelscount
- Rib heightmm
- Rib widthmm
- Attached tuck lidon / off
Ready-sized tray with integral channel ribs presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tray with integral channel ribs yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.