Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TRAPEZOID-TRAY-01Trays & lids
Trapezoid-footprint tray dieline
An open tray on a trapezoid floor with plan-splayed walls, optionally with a doubled raised header at the back. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 200 × 60 mm
Outside303.2 × 203.2 × 63.2 mm
Flat blank416.1 × 320 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TRAPEZOID-TRAY-01
- Inside size
- Back width 300 · Depth 200 · Wall height 60 mm
- Size range
- Back width 80–800 · Depth 50–500 · Wall height 20–300 mm
- Manufacturing
- 301.6 × 201.6 × 61.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.107 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KB-fluteSBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-TRAPEZOID-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Floor | 300 × 200 | L × W |
| Front wall | 195 × 60 | – × H |
| Back wall | 300 × 60 | L × H |
| Side wall ×2 | 60 × 206.8 | H × – |
| Glue flap ×4 | 56 × 15 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Front widthmm
- Back header heightmm
Ready-sized trapezoid-footprint tray presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this trapezoid-footprint tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.