Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TRAPEZOID-TRAY-01Trays & lids
Trapezoid tray with doubled header dieline
An open tray on a trapezoid floor with plan-splayed walls, optionally with a doubled raised header at the back. A ready-sized preset of the trapezoid-footprint tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside350 × 250 × 80 mm
Outside353.2 × 253.2 × 83.2 mm
Flat blank505.4 × 707.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TRAPEZOID-TRAY-01
- Inside size
- Back width 350 · Depth 250 · Wall height 80 mm
- Size range
- Back width 80–800 · Depth 50–500 · Wall height 20–300 mm
- Manufacturing
- 351.6 × 251.6 × 81.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.268 m²
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KB-fluteSBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-TRAPEZOID-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Floor | 350 × 250 | L × W |
| Front wall | 227.5 × 80 | – × H |
| Back wall and header | 350 × 230 | L × – |
| Side wall ×2 | 80 × 257.4 | H × – |
| Header roll | 350 × 1.6 | L × – |
| Glue flap ×4 | 76 × 15 | – |
| Header inner ply | 350 × 146 | L × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Front widthmm
- Back header heightmm
The trapezoid-footprint tray family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this trapezoid tray with doubled header yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.