Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-LABEL-ROLL-01Cards & tags
Label roll dieline
Repeated die-cut labels on a release liner wound around a core, with a length of liner pulled off the roll. Artwork is one label; the preview repeats it at the label pitch. A parametric template — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside50 × 50 mm
Outside50 × 50 mm
Flat blank50 × 49.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-LABEL-ROLL-01
- Inside size
- Label width 50 · Label height 50 mm
- Size range
- Label width 10–150 · Label height 10–150 mm
- Manufacturing
- 50 × 50 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.002 m² · about 252 up on a 720 × 1020 mm sheet
- Default board
- Gloss label stock · 0.08 mm caliper
- Board options
- Label glossLabel matteClear BOPPPaper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Label shape4 options
- Gap between labelsmm
- Core inside diametermm
- Roll diametermm
- Labels pulled offcount
Ready-sized label roll presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this label roll yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.