Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Self-locking cup grid carrier dieline
One corrugated blank forms a floor, captive rolled walls and a full circular-aperture deck. Choose shouldered front-bottom tongues or front-top deck locks; both close without glue. Independently size the cup rows, columns, hole diameter and centre spacing. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside210 × 200 × 55 mm
Outside219 × 201.8 × 56.8 mm
Flat blank441.7 × 582.7 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside length 210 · Inside width 200 · Deck height 55 mm
- Size range
- Inside length 80–600 · Inside width 70–600 · Deck height 25–200 mm
- Manufacturing
- 218.1 × 200.9 × 55.9 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.198 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- F-flute micro corrugated · 0.9 mm caliper
- Board options
- F-fluteE-flute WE-flute KB-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.9 mm for F-flute micro corrugated). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 218.1 × 200.9 | – × W + T |
| Inner front support liner | 218.1 × 55 | – × H |
| Back | 218.1 × 55.9 | – × H + T |
| Front ear ×2 | 55 × 53.1 | H × – |
| Back ear ×2 | 55 × 53.1 | H × – |
| Left end | 55 × 200.9 | H × W + T |
| Left end roll | 1.8 × 199.1 | – × W − T |
| Left end (inside) | 55 × 199.1 | H × W − T |
| Right end | 55 × 200.9 | H × W + T |
| Right end roll | 1.8 × 199.1 | – × W − T |
| Right end (inside) | 55 × 199.1 | H × W − T |
| Full cup aperture deck | 218.1 × 200.1 | – |
| Front wall with lower locks | 218.1 × 55 | – × H |
| Captive deck end flap ×2 | 54.1 × 196.4 | H − T × – |
| Lower locking neck through floor ×2 | 27.3 × 1.8 | – |
| Fold flat under the floor to retain the neck ×2 | 27.3 × 14 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Deck closure2 options
- Cup columnscount
- Cup rowscount
- Aperture diametermm
- Length centre spacingmm
- Width centre spacingmm
- Lock tabscount
- Tab widthmm
- Tab depthmm
- Lock tonguescount
Ready-sized self-locking cup grid carrier presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this self-locking cup grid carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.