Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Six-jar locking tray dieline
One corrugated blank forms a floor, captive rolled walls and a full circular-aperture deck. Choose shouldered front-bottom tongues or front-top deck locks; both close without glue. Independently size the cup rows, columns, hole diameter and centre spacing. A ready-sized preset of the self-locking cup grid carrier — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside280 × 190 × 60 mm
Outside296 × 193.2 × 63.2 mm
Flat blank540.8 × 581.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside length 280 · Inside width 190 · Deck height 60 mm
- Size range
- Inside length 80–600 · Inside width 70–600 · Deck height 25–200 mm
- Manufacturing
- 294.4 × 191.6 × 61.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.245 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- F-fluteE-flute WE-flute KB-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 294.4 × 191.6 | – × W + T |
| Inner front support liner | 294.4 × 60 | – × H |
| Back | 294.4 × 61.6 | – × H + T |
| Front ear ×2 | 60 × 56.8 | H × H − 2T |
| Back ear ×2 | 60 × 56.8 | H × H − 2T |
| Left end | 60 × 191.6 | H × W + T |
| Left end roll | 3.2 × 188.4 | – × W − T |
| Left end (inside) | 60 × 188.4 | H × W − T |
| Right end | 60 × 191.6 | H × W + T |
| Right end roll | 3.2 × 188.4 | – × W − T |
| Right end (inside) | 60 × 188.4 | H × W − T |
| Full cup aperture deck | 294.4 × 190.8 | – × W + T/2 |
| Front wall with lower locks | 294.4 × 60 | – × H |
| Captive deck end flap ×2 | 58.4 × 184.7 | H − T × – |
| Lower locking neck through floor ×2 | 30 × 3.2 | – |
| Fold flat under the floor to retain the neck ×2 | 30 × 14 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Deck closure2 options
- Cup columnscount
- Cup rowscount
- Aperture diametermm
- Length centre spacingmm
- Width centre spacingmm
- Lock tabscount
- Tab widthmm
- Tab depthmm
- Lock tonguescount
The self-locking cup grid carrier family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this six-jar locking tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.