Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Twelve-cup catering grid dieline
One corrugated blank forms a floor, captive rolled walls and a full circular-aperture deck. Choose shouldered front-bottom tongues or front-top deck locks; both close without glue. Independently size the cup rows, columns, hole diameter and centre spacing. A ready-sized preset of the self-locking cup grid carrier — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside420 × 310 × 65 mm
Outside452 × 316.4 × 71.4 mm
Flat blank721.6 × 844.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside length 420 · Inside width 310 · Deck height 65 mm
- Size range
- Inside length 80–600 · Inside width 70–600 · Deck height 25–200 mm
- Manufacturing
- 448.8 × 313.2 × 68.2 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.502 m²
- Default board
- B-flute shipping · 3.2 mm caliper
- Board options
- F-fluteE-flute WE-flute KB-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (3.2 mm for B-flute shipping). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 448.8 × 313.2 | – × W + T |
| Inner front support liner | 448.8 × 65 | – × H |
| Back | 448.8 × 68.2 | – × H + T |
| Front ear ×2 | 65 × 58.6 | H × H − 2T |
| Back ear ×2 | 65 × 58.6 | H × H − 2T |
| Left end | 65 × 313.2 | H × W + T |
| Left end roll | 6.4 × 306.8 | – × W − T |
| Left end (inside) | 65 × 306.8 | H × W − T |
| Right end | 65 × 313.2 | H × W + T |
| Right end roll | 6.4 × 306.8 | – × W − T |
| Right end (inside) | 65 × 306.8 | H × W − T |
| Full cup aperture deck | 448.8 × 312.4 | – |
| Front wall with lower locks | 448.8 × 65 | – × H |
| Captive deck end flap ×2 | 61.8 × 300.7 | H − T × – |
| Lower locking neck through floor ×2 | 30 × 6.4 | – |
| Fold flat under the floor to retain the neck ×2 | 30 × 14 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Deck closure2 options
- Cup columnscount
- Cup rowscount
- Aperture diametermm
- Length centre spacingmm
- Width centre spacingmm
- Lock tabscount
- Tab widthmm
- Tab depthmm
- Lock tonguescount
The self-locking cup grid carrier family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this twelve-cup catering grid yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.