

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Charity collection box dieline
A sealed collection carton: both tucks glued, a perforated disc in the base to empty it. A ready-sized preset of the money box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-MONEY-BOX-01
- Structure
- Money box
- Inside size
- Width 100 · Depth 100 · Height 150 mm
- Size range
- Width 50–250 · Depth 40–200 · Height 50–300 mm
- Manufacturing
- 100.6 × 100.6 × 150.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.103 m²
- Default board
- Folding boxboard 400 g · 0.6 mm caliper
- Board options
- SBS 350SBS 300FBB 400GD2 350Kraft 350Black 350F-fluteE-flute WPET 0.3SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 100 × 100 × 150 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 6 ups, within 2 ups (33.3 %).
How it folds
The charity collection box erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLeft side, Back, Right side, Glue flap
- 2Fold the dust flaps inTop dust flap, Bottom dust flap and 2 more
- 3Tuck the flaps inTop tuck, Bottom tuck
- 4Close the end flapsTop closure, Bottom closure
How the blank is sized
Score-to-score panel sizes of this DM-MONEY-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.6 mm for Folding boxboard 400 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 100.6 × 150.6 | – × H + T |
| Left side | 100.6 × 150.6 | – × H + T |
| Back | 100.6 × 150.6 | – × H + T |
| Right side | 100 × 150.6 | – × H + T |
| Glue flap | 12 × 150.6 | – × H + T |
| Top closure | 100.6 × 99.4 | – |
| Top tuck | 99.4 × 15 | – |
| Top dust flap | 100.6 × 49.3 | – |
| Top dust flap | 100 × 49.3 | – |
| Bottom closure | 100.6 × 99.4 | – |
| Bottom tuck | 99.4 × 15 | – |
| Bottom dust flap | 100.6 × 49.3 | – |
| Bottom dust flap | 100 × 49.3 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 15 options; the template and 3D preview follow each change.
- Tuck depthmm
- Slit lockon / off
- Thumb notchon / off
- Notch radiusmm
- Dust flap profile2 options
- Top tuck depthmm
- Top dust flap depthmm
- Bottom tuck depthmm
- Bottom dust flap depthmm
- Tuck corner radiusmm
- Dust flap taper°
- Dust flap tip bevelmm
- Slot lengthmm
- Slot widthmm
- Emptying2 options
The money box family
The same structure with sizes, boards and options set for a use.

Preset
Preset
Preset
Preset
See where an idea can go.
Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Give a juice break a little anticipation.
The job
- Make a counter entry box for a juice-bar competition, with cards and a pen beside it.
Choose your starting point
The competition preset uses 200 × 200 × 250 mm inside dimensions, FBB 400 board, tuck ends and a 120 × 5 mm slot through the top lid. Insert A6 cards short edge first: their 105 mm width fits the slot. Confirm card thickness, entry capacity, closure and approved competition instructions on a physical sample. This is a folding carton, not a secure ballot box; the loose cards and pen are separate items.
Explore the actual templates
Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.
Before you choose this template
Size, materials, downloads and production checks.
Will the charity collection box dieline fit my product?
A sealed collection carton: both tucks glued, a perforated disc in the base to empty it. The default dimensions in inside-size mode are Width 100 mm, Depth 100 mm, Height 150 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Width 50–250 mm, Depth 40–200 mm, Height 50–300 mm. At the default settings, the editor also exposes Tuck depth, Slit lock, Thumb notch, Notch radius, Dust flap profile, Top tuck depth and 9 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is Folding boxboard 400 g (0.6 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, E-flute white / kraft, Clear PET 0.3 mm, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this charity collection box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.






