Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-MULTISHEET-FINGER-01Shipping
Finger-jointed puzzle box dieline
Six separate face sheets with one hand-glue tab per joining edge, for making a large paper box from smaller printer sheets. The closed preview assembles all six faces. Validate stock and joining strength for your intended use. A ready-sized preset of the six-sheet joined paper box — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside150 × 150 × 150 mm
Outside150 × 150 × 150 mm
Flat blank150.5 × 150.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-MULTISHEET-FINGER-01
- Inside size
- Box length 150 · Box width 150 · Height 150 mm
- Size range
- Box length 30–800 · Box width 30–800 · Height 30–800 mm
- Manufacturing
- 150 × 150 × 150 mm score to score · inside vs outside sizes
- Parts
- 6 parts — Face sheet 1, Face sheet 2, Face sheet 3, Face sheet 4, Face sheet 5, Face sheet 6
- Board area
- 0.135 m² · about 24 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Paper 170SBS 300Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Joining tab depthmm
- Edge joint2 options
- Finger widthmm
The six-sheet joined paper box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this finger-jointed puzzle box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.