Skip to content
DielineMaker
Start designing free
Single-sheet five-point gift star
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

Parametric structureShapes

Single-sheet five-point gift star dieline

Fold a star with broad front and back faces, raised points and an inward-folding rim. Choose two sheets with joining tabs or a connected blank with overlapping webs. A ready-sized preset of the origami pillow star box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

InsideØ 140 × 31.1 mm
OutsideØ 140 × 31.1 mm
Flat blank253.8 × 183.3 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
—
Structure
Origami pillow star box
Inside size
Outer point diameter 140 · Front-to-back thickness 31.1 mm
Size range
Outer point diameter 40–600 · Front-to-back thickness 5–200 mm
Manufacturing
Ø 140 × 31.1 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.028 m²
Default board
Art paper 170 g · 0.16 mm caliper
Board options
Paper 170SBS 300Kraft 350SBS 18 pt
Good for
single sheetfolding stargift cartonpillow star boxstar gift boxorigami starfolded star rimchristmas decorationhanging starcord hole

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Reverse crease
  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Single-sheet five-point gift star flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 140 × 0 × 31.1 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

16 per sheet · Connected pillow star
16 copies of Connected pillow star on the stock sheet

Not proven optimal: upper bound 23 ups, within 7 ups (30.4 %).

Open in editor with this sheet

How it folds

The single-sheet five-point gift star erects in 1 step, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the gussetsFront point 1, Front point 2, Front point 3, Front point 4, Front point 5 and 24 more
FrontBack · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Star pointscount
  • Single connected blankon / off
  • Cord hole diametermm

The origami pillow star box family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the single-sheet five-point gift star dieline fit my product?

Fold a star with broad front and back faces, raised points and an inward-folding rim. Choose two sheets with joining tabs or a connected blank with overlapping webs. The default dimensions in inside-size mode are Outer point diameter 140 mm, Front-to-back thickness 31.1 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Outer point diameter 40–600 mm, Front-to-back thickness 5–200 mm. At the default settings, the editor also exposes Star points, Single connected blank, Cord hole diameter. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Art paper 170 g (0.16 mm caliper). This structure allows Art paper 170 g, SBS white board 300 g, Kraft board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All shapes templates

Make this single-sheet five-point gift star yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.