Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Die-cut handle plastic bag — standard dieline
A film carrier with actual rounded handle slots, a reinforced top option and an optional bottom gusset. The continuous web contains front, bottom and back cuts with seal and fold guides. Film caliper, sealing conditions and carrying strength must match the converter’s specification. A ready-sized preset of the die-cut handle plastic bag — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 400 mm
Outside300 × 400 mm
Flat blank300 × 870 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Face width 300 · Bag body height 400 mm
- Size range
- Face width 140–650 · Bag body height 150–800 mm
- Manufacturing
- 300 × 400 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Continuous bag film, front punched handle patch, back punched handle patch
- Board area
- 0.270 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- White LDPE carrier film · 0.06 mm caliper
- Board options
- White LDPEClear LDPEHDPE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.06 mm for White LDPE carrier film). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| FrontContinuous bag film | 300 × 400 | L × H |
| Bottom gussetContinuous bag film | 300 × 70 | L × – |
| BackContinuous bag film | 300 × 400 | L × H |
| Handle reinforcementfront punched handle patch | 110 × 41 | – |
| Handle reinforcementback punched handle patch | 110 × 41 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Bottom gusset half-web (G)mm
- Seal widthmm
- Preview fill%
- Handle slot widthmm
- Handle slot heightmm
- Handle centre from topmm
- Handle reinforcement patchon / off
The die-cut handle plastic bag family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this die-cut handle plastic bag — standard yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.