Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-POINTED-CONE-CARTON-01Shapes
Four-face pointed fries cone dieline
A pointed 3–8 sided cone with a reclosable polygon cap or an open serving mouth. The open version can slope from a high rear rim to a low front glue seam. Glue the seam before filling; use suitable food-contact board for food. A ready-sized preset of the pointed polygon cone carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 110 × 170 mm
OutsideØ 111 × 171 mm
Flat blank161.7 × 198.1 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-POINTED-CONE-CARTON-01
- Structure
- Pointed polygon cone carton
- Inside size
- Rim width across corners 110 · Height (point to highest rim) 170 mm
- Size range
- Rim width across corners 40–300 · Height (point to highest rim) 40–400 mm
- Manufacturing
- Ø 110 × 170 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.024 m² · about 16 up on a 720 × 1020 mm sheet
- Default board
- Food kraft, PE-lined 320 g · 0.5 mm caliper
- Board options
- SBS 350Kraft 350FBB 400SBS 300Food kraft PESBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The four-face pointed fries cone erects in 2 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upSide and 2 more
- 2Fold the glue flap and glue the seamGlue flap
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Closure2 options
- Front rim dropmm
- Sidescount
The pointed polygon cone carton family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the four-face pointed fries cone dieline fit my product?
A pointed 3–8 sided cone with a reclosable polygon cap or an open serving mouth. The open version can slope from a high rear rim to a low front glue seam. Glue the seam before filling; use suitable food-contact board for food. The default dimensions in inside-size mode are Rim width across corners 110 mm, Height (point to highest rim) 170 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Rim width across corners 40–300 mm, Height (point to highest rim) 40–400 mm. At the default settings, the editor also exposes Closure, Front rim drop, Sides. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is Food kraft, PE-lined 320 g (0.5 mm caliper). This structure allows SBS white board 350 g, Kraft board 350 g, Folding boxboard 400 g, SBS white board 300 g, Food kraft, PE-lined 320 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this four-face pointed fries cone yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.