Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureRigid
Necklace box dieline
Flat full-lid rigid box for a pendant or chain on a padded insert. A ready-sized preset of the rigid lid & base box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside180 × 130 × 30 mm
Outside186 × 136 × 33 mm
Flat blank281 × 231 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 180 · Width 130 · Height 30 mm
- Size range
- Length 30–500 · Width 30–400 · Height 15–300 mm
- Manufacturing
- 183 × 133 × 31.5 mm score to score · inside vs outside sizes
- Parts
- 4 parts — Base wrap, Lid wrap, Base board, Lid board
- Board area
- 0.201 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 1.5 mm · 1.5 mm caliper
- Board options
- Rigid 2 mmRigid 1.5
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Kiss cut
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.5 mm for Rigid greyboard 1.5 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomBase wrap | 183.2 × 133.2 | L + 2Tb + p × W + 2Tb + p |
| Front wallBase wrap | 183.2 × 31.7 | – × H + Tb + p |
| Front rimBase wrap | 183.2 × 1.7 | – |
| Front turn-inBase wrap | 179.8 × 15 | – |
| Corner ear ×4Base wrap | 15 × 31.7 | – |
| Back wallBase wrap | 183.2 × 31.7 | – × H + Tb + p |
| Back rimBase wrap | 183.2 × 1.7 | – |
| Back turn-inBase wrap | 179.8 × 15 | – |
| Left wallBase wrap | 31.7 × 133.2 | – × H + Tb + p |
| Left rimBase wrap | 1.7 × 133.2 | – |
| Left turn-inBase wrap | 15 × 129.8 | – |
| Right wallBase wrap | 31.7 × 133.2 | – × H + Tb + p |
| Right rimBase wrap | 1.7 × 133.2 | – |
| Right turn-inBase wrap | 15 × 129.8 | – |
| Pose rigLid wrap | 100 × 25.1 | – |
| Lid hingeLid wrap | 100 × 25.1 | – |
24 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Lid depthmm
- Ribbon slots in lidon / off
- Recessed tile in lidon / off
- Ring insert slotscount
- Ring slot lengthmm
- Ring insert heightmm
The rigid lid & base box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this necklace box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.