Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureRigid
Tea drawer box dieline
Wide slide box for twelve tea envelopes or three tins. A ready-sized preset of the rigid drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 120 × 70 mm
Outside210 × 124.3 × 78 mm
Flat blank587.8 × 159 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 200 · Depth 120 · Height 70 mm
- Size range
- Width 40–450 · Depth 40–450 · Height 15–200 mm
- Manufacturing
- 205 × 122 × 74 mm score to score · inside vs outside sizes
- Parts
- 4 parts — Sleeve wrap, Tray wrap, Sleeve board, Tray board
- Board area
- 0.321 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 2 mm · 2 mm caliper
- Board options
- Rigid 2 mmRigid 1.5
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Kiss cut
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (2 mm for Rigid greyboard 2 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base ×2Sleeve wrap | 111 × 124.3 | – |
| Left sideSleeve wrap | 78 × 124.3 | – |
| TopSleeve wrap | 210 × 124.3 | – |
| Right sideSleeve wrap | 78 × 124.3 | – |
| Left side back rimSleeve wrap | 78 × 2.3 | – |
| Left side back turn-inSleeve wrap | 73.3 × 15 | – |
| Left side front rimSleeve wrap | 78 × 2.3 | – |
| Left side front turn-inSleeve wrap | 73.3 × 15 | – |
| Top back rimSleeve wrap | 210 × 2.3 | – |
| Top back turn-inSleeve wrap | 205.3 × 15 | – |
| Top front rimSleeve wrap | 210 × 2.3 | – |
| Top front turn-inSleeve wrap | 205.3 × 15 | – |
| Right side back rimSleeve wrap | 78 × 2.3 | – |
| Right side back turn-inSleeve wrap | 73.3 × 15 | – |
| Right side front rimSleeve wrap | 78 × 2.3 | – |
| Right side front turn-inSleeve wrap | 73.3 × 15 | – |
29 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Pull2 options
- Ribbon widthmm
The rigid drawer box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tea drawer box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.