Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-RING-HANDLE-CARRIER-01Carriers
One-piece round carrier with ring handles dieline
Two round faces on a connected base strip, each topped by a ring handle; side lock tabs on the base ends. One blank, no glue. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 50 × 140 mm
Outside121 × 51 × 141 mm
Flat blank176.5 × 471.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-RING-HANDLE-CARRIER-01
- Inside size
- Base width 120 · Depth 50 · Body height 140 mm
- Size range
- Base width 40–400 · Depth 15–200 · Body height 30–500 mm
- Manufacturing
- 120.5 × 50.5 × 140.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.058 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350GD2 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-RING-HANDLE-CARRIER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 120.5 × 50 | L + T × W |
| Front face | 120.5 × 210.7 | L + T × – |
| Back face | 120.5 × 210.7 | L + T × – |
| Side lock tab ×2 | 28 × 48 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Ring handle diametermm
- Ring bandmm
- Side lock tab heightmm
Ready-sized one-piece round carrier with ring handles presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this one-piece round carrier with ring handles yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.