Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-SADDLE-ENDWALL-INSERT-01Trays & lids
Glue-free tube saddle insert dieline
A-frame saddles locked into base slots with tabs, no glue. A ready-sized preset of the cradle end-wall insert — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 70 × 50 mm
Outside203.2 × 70 × 51.6 mm
Flat blank453.6 × 70 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-SADDLE-ENDWALL-INSERT-01
- Inside size
- Length 200 · Width 70 · Height 50 mm
- Size range
- Length 60–600 · Width 30–300 · Height 20–250 mm
- Manufacturing
- 200 × 70 × 50 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.031 m² · about 18 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KSBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-SADDLE-ENDWALL-INSERT-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 200 × 70 | L × W |
| Saddle outer leg ×2 | 55.9 × 70 | – × W |
| Saddle inner leg ×2 | 55.9 × 70 | – × W |
| Saddle lock tab ×2 | 15 × 35 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Supports2 options
- Cradle diametermm
- Saddle half-spanmm
- Saddle fixing2 options
The cradle end-wall insert family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this glue-free tube saddle insert yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.