Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA A01.01.00.00Sleeves
Lunch tray sleeve — Open-ended sleeve dieline
Editable 245 × 65 × 175 mm starting point using open-ended sleeve. Adjust the dimensions to your product before prototyping. A ready-sized preset of the open-ended sleeve — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside245 × 65 × 175 mm
Outside245 × 66 × 176 mm
Flat blank493.5 × 245 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA A01.01.00.00
- Inside size
- Length 245 · Depth 65 · Height 175 mm
- Size range
- Length 20–600 · Depth 3–300 · Height 15–400 mm
- Manufacturing
- 245 × 65.5 × 175.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.120 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350Black 350GD2 350PET 0.3F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA A01.01.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 175.5 × 245 | H + T × L |
| Top | 65.5 × 245 | W + T × L |
| Back | 175.5 × 245 | H + T × L |
| Bottom | 65 × 245 | W × L |
| Glue flap | 12 × 245 | – × L |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Thumb notcheson / off
- Notch radiusmm
- Windowon / off
The open-ended sleeve family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this lunch tray sleeve — open-ended sleeve yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.