Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-MIXED-END-04Tuck end
Snap-lock carton with glued top dieline
1-2-3 snap-lock bottom with glued overlap flaps on top. A ready-sized preset of the snap-lock bottom — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside75 × 75 × 120 mm
Outside76 × 76 × 121 mm
Flat blank313.5 × 244.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-MIXED-END-04
- Inside size
- Length 75 · Width 75 · Height 120 mm
- Size range
- Length 30–400 · Width 20–300 · Height 30–500 mm
- Manufacturing
- 75.5 × 75.5 × 120.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.063 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350Black 350F-fluteE-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-MIXED-END-04 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 75.5 × 120.5 | – × H + T |
| Left side | 75.5 × 120.5 | – × H + T |
| Back | 75.5 × 120.5 | – × H + T |
| Right side | 75 × 120.5 | – × H + T |
| Glue flap | 12 × 120.5 | – × H + T |
| Snap end | 75.5 × 25 | – |
| Snap end | 75 × 25 | – |
| Snap bottom | 75.5 × 48.8 | – |
| Snap tuck | 75.5 × 48.3 | – |
| Dust flap | 75.5 × 37 | – |
| Dust flap | 75 × 37 | – |
| Inner seal flap | 75.5 × 74.5 | – |
| Top seal flap | 75.5 × 75 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 11 options; the template and 3D preview follow each change.
- Top end2 options
- Outer flap extramm
- Top dust flap depthmm
- Tuck depthmm
- Slit lockon / off
- Thumb notchon / off
- Notch radiusmm
- Windowon / off
- Cord handle holeson / off
- Tongue widthmm
- Tongue heightmm
The snap-lock bottom family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this snap-lock carton with glued top yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.