Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Bakery gift carrier dieline
A sealed gift carrier with aligned holes through both roof plies for a separate cord or strap. Glue the full-overlap base after filling; tear the front-and-side strip to lift the top on its scored back hinge. The separate handle is supplied by you. A ready-sized preset of the tear-open carrying carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside240 × 160 × 140 mm
Outside243.2 × 163.2 × 143.2 mm
Flat blank824.8 × 461.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside length 240 · Inside width 160 · Inside height 140 mm
- Size range
- Inside length 80–500 · Inside width 80–500 · Inside height 50–350 mm
- Manufacturing
- 241.6 × 161.6 × 141.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.291 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- SBS 350FBB 400Kraft 350F-fluteE-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 241.6 × 104.6 | L + T × – |
| Left side | 161.6 × 104.6 | W + T × – |
| Back | 241.6 × 104.6 | L + T × – |
| Right side | 160 × 104.6 | W × – |
| Glue flap | 20 × 104.6 | – |
| Back lifting hinge | 241.6 × 37 | L + T × – |
| Left top rim | 161.6 × 32 | W + T × – |
| Front top rim | 241.6 × 32 | L + T × – |
| Right top rim | 160 × 32 | W × – |
| Top rim side glue flap | 20 × 32 | – |
| Left tear strip | 161.6 × 5 | W + T × – |
| Front tear strip | 241.6 × 5 | L + T × – |
| Right tear strip | 160 × 5 | W × – |
| Dust flap ×2 | 161.6 × 35 | W + T × – |
| Dust flap ×2 | 160 × 35 | W × – |
| Inner seal flap ×2 | 241.6 × 158.4 | L + T × W − T |
2 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Handle hole spacingmm
- Handle hole diametermm
- Top rim depthmm
- Tear strip widthmm
The tear-open carrying carton family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this bakery gift carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.