Skip to content
DielineMaker
Start designing free
Walker lock tray
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-ROLLED-END-TRAY-01Trays & lids

Walker lock tray dieline

Unglued folding-carton tray: double end walls trap the side-panel corner flaps and lock into slots at the bottom fold. 9 × 6 × 2 in. A ready-sized preset of the self-locking tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside229 × 152 × 51 mm
Outside232.5 × 153 × 51.5 mm
Flat blank438.5 × 255 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-ROLLED-END-TRAY-01
Structure
Self-locking tray
Inside size
Length 229 · Width 152 · Height 51 mm
Size range
Length 50–800 · Width 40–600 · Height 15–300 mm
Manufacturing
232 × 152.5 × 51.3 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.098 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
E-flute KE-flute WB-fluteF-fluteSBS 350Kraft 350FBB 400SBS 18 pt
Good for
walker locklock trayunglued traydouble end wallstrayself-lockingungluedno glueroll end traydouble wall

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Bleed 3 mm
Walker lock tray flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 229 × 152 × 51 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

3 per sheet · Tray
3 copies of Tray on the stock sheet

Not proven optimal: upper bound 4 ups, within 1 up (25.0 %).

Open in editor with this sheet

How it folds

The walker lock tray erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upFront, Back
  2. 2
    Fold the corner ears inFront ear, Back ear and 2 more
  3. 3
    Fold the walls upLeft end, Right end
  4. 4
    Fold the stripLeft end roll, Left end (inside), Right end roll, Right end (inside)
BottomFront · 1Back · 1Back ear · 2Back ear · 2Left · 3Left end (inside) · 4Right · 3Right end (inside) · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-ROLLED-END-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Base232 × 152.5– × W + T
Front232 × 51.3– × H + T/2
Back232 × 51.3– × H + T/2
Front ear ×251 × 49.5H × –
Back ear ×251 × 49.5H × –
Left end51 × 152.5H × W + T
Left end roll1.3 × 151.5– × W − T
Left end (inside)51 × 151.5H × W − T
Right end51 × 152.5H × W + T
Right end roll1.3 × 151.5– × W − T
Right end (inside)51 × 151.5H × W − T

Adjustable in the editor

Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.

  • Lock tonguescount
  • Thumb notchon / off
  • Food contacton / off
  • Vent holes per long wallcount
  • Vent diametermm
  • End hand holeson / off

The self-locking tray family

The same structure with sizes, boards and options set for a use.

All 21 self-locking tray templates

Before you choose this template

Size, materials, downloads and production checks.

Will the walker lock tray dieline fit my product?

Unglued folding-carton tray: double end walls trap the side-panel corner flaps and lock into slots at the bottom fold. 9 × 6 × 2 in. The default dimensions in inside-size mode are Length 229 mm, Width 152 mm, Height 51 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 50–800 mm, Width 40–600 mm, Height 15–300 mm. At the default settings, the editor also exposes Lock tongues, Thumb notch, Food contact, Vent holes per long wall, Vent diameter, End hand holes. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows E-flute kraft / kraft, E-flute white / kraft, B-flute shipping, F-flute micro corrugated, SBS white board 350 g, Kraft board 350 g, Folding boxboard 400 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this walker lock tray yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.