Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TRIANGULAR-DRAWER-01Trays & lids
Triangular chocolate bar drawer dieline
A triangular-prism sleeve with a sliding tray of the same section: sloping tray walls, glued trapezoid ends, a finger hole and guide slots in the sleeve sides. A ready-sized preset of the triangular drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 80 × 70 mm
Outside200 × 81 × 71 mm
Flat blank200 × 255.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TRIANGULAR-DRAWER-01
- Inside size
- Length 200 · Base width 80 · Height 70 mm
- Size range
- Length 60–500 · Base width 30–250 · Height 20–250 mm
- Manufacturing
- 200 × 80.5 × 70.3 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Triangular sleeve, Sliding tray
- Board area
- 0.088 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350E-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-TRIANGULAR-DRAWER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Sleeve baseTriangular sleeve | 200 × 80.5 | L × W + T |
| Sleeve side ×2Triangular sleeve | 200 × 81 | L × – |
| Glue lapTriangular sleeve | 200 × 13.5 | L × – |
| Tray baseSliding tray | 198 × 75.3 | – |
| Tray wall ×2Sliding tray | 198 × 41.7 | – |
| Tray front endSliding tray | 36.2 × 75.3 | – |
| Tray back endSliding tray | 36.2 × 75.3 | – |
| Corner glue ear ×4Sliding tray | 12 × 41.7 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Tray wall share%
- Finger holeon / off
- Sleeve guide slotson / off
The triangular drawer box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this triangular chocolate bar drawer yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.