Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TRIANGULAR-FRIES-CONE-01Food
Triangular snack cone (level mouth) dieline
A pointed serving cone of three flat triangular faces meeting at the bottom point, with an open triangular mouth and a lower front for easy access. One blank with a glued back seam. A ready-sized preset of the pointed triangular fries cone — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 78 × 130 mm
Outside90 × 78 × 130 mm
Flat blank140 × 220.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TRIANGULAR-FRIES-CONE-01
- Inside size
- Mouth width 90 · Mouth depth 78 · Height 130 mm
- Size range
- Mouth width 50–250 · Mouth depth 40–250 · Height 60–350 mm
- Manufacturing
- 90 × 78 × 130 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.019 m² · about 25 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Food kraft PEKraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Front dropmm
- Seam tabmm
The pointed triangular fries cone family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this triangular snack cone (level mouth) yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.