Skip to content
DielineMaker
Start designing free

Design·14 min read

Customize a dieline: closures, cutouts, add-ons and flaps

Change a template’s top and bottom, add windows and handles, attach a hang header or glue flap, leave a flap off the die and set the fold order.

Updated Open a carton to customize

Before you start

What goes in
A template that is close to the package you need, and a clear idea of what should change: the closure, an opening, a hanging or carrying feature, or a flap you do not want.
What comes out
A project whose dieline, folded 3D view, sheet layout and files all show your changes, saved as one editable project.

A practical example

A tuck carton that hangs on a peg

Start from a straight tuck end carton, choose a closure that suits a hanging pack, add a hang header on the back, cut a window in the front and leave off a flap you do not need. These are practice choices; confirm the construction with your converter.

Step-by-step walkthrough

  1. Open Structure

    Open the editor on a template, switch to the Design workspace and click Structure in the left rail. The panel shows the style name and code with a Change button, then up to four tabs: Shape, Cutouts, Add-ons and Flaps. A tab appears only when the construction can use it, so a design with no free edge has no Add-ons tab.

  2. Choose the top and bottom

    On the Shape tab, open Top & bottom. Tick a chip under What matters most? to filter the closures, such as Reclosable or Tamper-evident. Under Top and under Bottom, hover or focus a card to preview it on the dieline and in 3D, then click to keep it. A card marked with a plus sign, for example “+ Bottom: 1-2-3 snap lock”, also changes the other end. More top closures and More bottom closures show the rest.

  3. Check the construction and recipes

    Below the two ends, Construction lists the variants of the closure you picked with their codes, and Popular recipes offers named combinations. For a slotted case such as the Shipping box, this is where you choose between regular slotted, overlap and full overlap. Click one to switch; each choice is one undo step.

  4. Add a window or cutout

    Open the Cutouts tab. Pick the face under Face for new features, then click a preset under Quick add, a window shape, a hang hole or a handle. You can also drag a shape onto a face in the flat dieline. Select the cutout to drag or resize it, or type exact values such as Width, Height and From left.

  5. Attach an add-on

    Open the Add-ons tab and click Hang header, Carry handle, Tab lock or Glue flap. The new add-on goes on the best free edge, or on the selected panel when one of its edges is free. In the small flat drawing, click another highlighted edge to move it there, then set its Height, Width and other options.

  6. Leave a flap off the die

    Open the Flaps tab. Panels are grouped as Closures, lids and tucks, Dust flaps, ears and flaps, Glue flaps, and Walls and base. Click Remove beside a flap. The crease it hung from becomes a cut, and the 3D view, sheet layout and files update. Removed flaps are listed with Restore.

  7. Set the fold order and recheck

    Under the canvas, open Steps to read how the pack folds and use Reorder, or open Order, select a flap on the box and set its fold step. Then change a dimension in Print setup → Size and watch what happens to your cutouts and add-ons, as described below. Finish in the Dieline and 3D views.

Options at a glance

Control or choiceWhat it changesHow to use it well
ShapeThe closure builder for the top and bottom, the Parts picker and the parameter sections for the style.Start here: the closure decides which cutouts, add-ons and flaps are possible.
CutoutsWindows, hang holes, handles, notches and tear lines on any face.Use for openings in the board. They stay attached to their face when the size changes.
Add-onsHang header, Carry handle, Tab lock and Glue flap: real panels added on a free cut edge.Use when the structure needs an extra panel rather than a hole.
FlapsRemove or restore flaps and panels of the construction.Use to simplify a die. Exports describe the design as the standard construction, modified.
Fold barSteps, Collisions, Order and Timeline under the canvas.Use after structural changes to confirm the pack still folds in a sensible order.

Detailed control reference

Find the control, understand its effect, and choose it for the job you are making. Available controls depend on the selected structure, object, workspace and output.

Design → Structure → Shape tab → Top & bottom

What matters most?

A row of chips that filters the closure cards by a trait: Heavier items, Tamper-evident, Reclosable, Fast packing, Peg hook, Shelf display or Carry handle. A line under the chips says why the chosen trait matters.

When it helps most
Pick the trait that decides the job, then compare only the closures that offer it. Click the chip again to clear it.
Impact and trade-offs
The chips only filter the cards. They do not change the design until you click a closure.

Design → Structure → Shape tab → Top & bottom → Top / Bottom

Top and Bottom closure cards

Each card is a closure for that end, drawn on your size. Hovering or focusing a card previews it in the Dieline and 3D views; clicking keeps it as a single undo step. A card with a plus sign also changes the other end.

When it helps most
Compare the top and bottom as a pair. Use More top closures and More bottom closures for less common ends, which are grouped under headings.
Impact and trade-offs
A different closure can change panel sizes, the blank and which cutouts and add-ons fit. Recheck artwork placement and the sheet layout afterwards.

Design → Structure → Shape tab → Top & bottom → Construction, Popular recipes

Construction and Popular recipes

Construction lists the variants of the closure you have, each with its standard code. Popular recipes are named combinations of a top and a bottom for the same kind of pack. For slotted cases the variants are regular slotted, overlap and full overlap.

When it helps most
Use Show all constructions to see every variant. Use a recipe such as Half-slotted container or Snap-bottom case as a starting point, then adjust either end.
Impact and trade-offs
The codes are the standard’s names for the construction. Your converter’s own drawing can still differ, so check it before ordering.

Design → Structure → Cutouts tab

Face for new features and Quick add

Face for new features chooses where a new cutout lands. Quick add holds ready presets such as Euro hang slot, Hand hole, Push-in hand hole, Perforated dispenser, Tear strip around the walls and Thumb notch. Windows, Hang holes, Handles and Tear lines sit below.

When it helps most
Choose the face first, then click a preset or shape. Hang holes, handles and notches start at their standard size.
Impact and trade-offs
A design can hold up to 64 cutouts. A thumb notch needs a free edge; folds and joints are refused.

Design → Structure → Cutouts tab → selected cutout → Opening

Opening: cutout, perforated and flap openings

Chooses how the outline behaves: the board is cut away, the outline is perforated so it can be torn out, or one side keeps a crease so the flap pushes in or folds back. A flap opening also asks for a Fold edge.

When it helps most
Use a cut-away for a window, a perforated outline for a tear-out panel and a flap for a push-in or fold-back opening.
Impact and trade-offs
When a window carries film, Print setup → Material notes it as window film (clear PET). Confirm the film with your converter.

Design → Structure → Add-ons tab

Add-on kinds

Hang header adds a header above a free edge with a peg-hook hole. Carry handle adds a tall header with a hand hole. Tab lock adds a tongue that pushes through a slot to lock a closure. Glue flap adds a flap that folds inside the next panel and is glued to it. Each is a real panel: it folds in 3D, takes artwork and goes into every file.

When it helps most
Click the tile for the kind you need. A design can hold up to 16 add-ons.
Impact and trade-offs
Add-ons attach to a free cut edge, not to a glue seam. Headers and glue flaps go on the construction’s own panels; a tab lock may also go on another add-on’s free edge. The editor places a hang header on the back first, a tab lock on tucks, lids and flaps, and a glue flap on the side edges of walls.

Design → Structure → Add-ons tab → Glue flap

Glue flap acceptance

A glue flap is accepted only where it lands on another panel when the pack closes. If nothing folds onto the edge, the editor says there is nothing to glue to and asks for an edge that closes against another panel. If the flap would run past the panel it glues to, it asks you to make it narrower or shorter.

When it helps most
Click highlighted edges in the small flat drawing to find one that works, then set Flap width and Span.
Impact and trade-offs
An add-on that cannot be built is left off the die with a message until you move or remove it.

Design → Structure → Add-ons tab → selected Hang header or Carry handle

Header options: Hole, Plies and Joint

Hole picks the cut-out through the header. Plies is Single or Double, glued, where the second ply folds back 180° and is glued. Joint is Creased or Unscored.

When it helps most
Use a double ply for a stiffer header and an unscored joint when the header should not fold.
Impact and trade-offs
With a double ply the hole is cut through both plies, 0.5 mm larger on the inner one.

Design → Structure → Flaps tab

Remove, Restore and Restore all

Remove leaves a flap or panel off the die and takes everything that folds from it too. Removed panels are listed with Restore, or Restore all when there are several.

When it helps most
Use it to drop a flap you do not need, such as a dust flap on a simple carton.
Impact and trade-offs
The base panel that everything folds from cannot be removed, and an add-on panel is removed on the Add-ons tab instead.

Under the canvas: Steps, Collisions, Order, Timeline

Fold bar: Steps, Order and Timeline

Steps lists how the dieline folds in numbered steps with a Reorder button. Order shows the fold step of the selected flap and a Folded target angle with Apply target to this step. Collisions and Timeline help you check the movement.

When it helps most
Select a flap on the box in Order to set the step it folds in, or open Steps to reorder whole steps.
Impact and trade-offs
A later edit that renumbers the fold steps resets your order to the template’s and shows a notice, so set it after the structure is final.

What happens to cutouts and add-ons when you change the size

Add-ons are kept while they still fit. When a size or construction change means an add-on can no longer be built, it comes off in the same undoable step and you see a notice such as “Hang header removed”, followed by the reason. Add-ons belong to the style they were made on, so changing the style removes them with a notice. While you type or scrub a number, the in-between values do not delete anything: the check runs against the value you settle on.

Cutouts follow their face. If a construction change takes the panel a cutout sits on away, the cutout is removed with the notice “A cutout was removed”, and Undo brings it back. A cutout on a flap that you removed yourself on the Flaps tab waits for that flap, so restoring it brings the cutout back too.

  • Read each notice before you carry on; it names what was removed and why.
  • Use Undo straight away if the change took away something you wanted.
  • A removed panel is put back, with a notice, if a later edit changes which panels fold from it.

A good order for customizing

Choose the closure first, because it decides the panels you have. Set the size and board next, then add cutouts and add-ons, then remove flaps, and set the fold order last. That order keeps the number of notices small and the fold steps stable.

Check your work

  • The closure suits the product and the way it is packed and opened.
  • Every cutout and add-on is still present after the final size is set.
  • The Dieline view shows the cuts and creases you expect, and 3D folds without panels colliding.
  • Artwork on changed panels has been rechecked.
  • The sheet layout and any export still match the final blank.

Troubleshooting

There is no Add-ons or Cutouts tab

The tab appears only when the construction supports it. Add-ons need a free cut edge, and a supplied-object template does not offer them. Change the closure or style, or use another tab.

A notice says an add-on or cutout was removed

Your size or construction change took away the panel or edge it needed. Undo, then choose a size or closure that keeps it, or move the add-on to another edge.

A glue flap or tab lock will not go on an edge

Choose an edge highlighted in the small flat drawing. A glue flap needs an edge that closes against another panel, and a tab lock needs a panel to lock into.

I cannot remove a panel

The base panel that the others fold from, add-on panels and curved panels stay on the die. Remove an add-on on the Add-ons tab.