Before you start
- What goes in
- A rough idea of the shape you need, a template to copy from, or a vector file from a supplier.
- What comes out
- A custom project whose panels and folds you can check in 3D, add artwork to and export like any other.
A practical example
A tray with an odd lid
Start from a template that is close, copy its linework, change a flap, run the geometry check and fold it in 3D. Treat the result as a prototype and confirm it with your converter.
Step-by-step walkthrough
Open the builder
Open Create custom dieline from the Custom dielines page, or open the editor, go to Print setup → Size and click Create custom dieline. A full-screen builder opens with three steps shown at the top: Draw, Check folds and Design & export.
Choose where to start
The builder opens on Start with a template. Search or pick a category, choose a template, set its size in millimetres, pick a Material and click Use linework. To start another way, use the bar at the top: Blank drawing for an empty page, Copy current dieline to copy the open design’s linework, or Import file for a supplier’s file. Back to drawing returns to the canvas.
Draw and edit the lines
Pick a tool from the toolbar: Select, Pan, Line, Connected, Rectangle, Rounded, Circle, Polygon, Arc or Flap. Set Units and Grid snap, and open Properties for the selected line. Give each line a Line type such as Cut, Crease, Reverse crease, Perforation, Kiss cut, Cut-crease or Double crease. A closed cut outline makes your first panel.
Add flaps from an edge
Choose the Flap tool, then select an edge line. Pick a Flap type such as Plain panel, Glue flap, Tuck flap, Dust flap, Lock tab or Mirror of this panel, set its size, optionally tick Flip to the other side, and click Add flap.
Run the geometry check
Watch the Geometry check on the right. It shows Start drawing, Needs attention or Ready, and a line count with the number of panels and folds. Click Locate on drawing beside a message to find the problem. The check can only judge shapes: confirm real fit and strength on a sample.
Check lines and folds
When the check says Ready, click Check lines & folds. A dialog opens on its Lines step with Units, Close gaps up to, Layers → line types and Checks. Click Set folds to reach the Folds step: choose the Root panel, set the Name and Board, and drag the Fold slider to see the folded preview. Create project finishes the job.
Design and export
Click Create project. In Print setup → Size, a project that carries a construction recipe lists numeric dimensions you can edit; otherwise the page reports the dieline’s size and you change the cut and fold geometry to change the shape. Then use Design → Structure, the fold bar, artwork and Download as for any project. Dieline and print downloads depend on your plan.
Ask for help when the idea is complex
In the builder, use Need help with a bespoke structure? or open the Custom dielines page and choose Request a custom design. A request starts a conversation; scope and price are agreed separately.
Options at a glance
| Control or choice | What it changes | How to use it well |
|---|---|---|
| Templates | Starts from a catalogue template’s linework at a size you set. | Use it when a standard construction is close to what you need. |
| Blank drawing | An empty drawing with no lines. | Use it for a shape no template covers. |
| Copy current dieline | Copies the open design’s linework into the builder. | Use it when you want to edit the lines of the design you already have open. |
| Geometry check | A live read-out of whether the lines make panels and folds. | Aim for Ready before you continue, then confirm the structure on a sample. |
| Import file | Reads a supplier’s file into the same builder flow. | See the supplier dielines guide for the import steps and warnings. |
| Units and Grid snap | The unit for drawing and the step lines snap to. | Use millimetres for most packaging work and a snap that matches your smallest dimension. |
Detailed control reference
Find the control, understand its effect, and choose it for the job you are making. Available controls depend on the selected structure, object, workspace and output.
Print setup → Size → Size tab → Create custom dieline; also the Custom dielines page
Create custom dieline
Opens the custom dieline builder as a full-screen dialog over the editor.
- When it helps most
- Use it when no template has the structure you need.
- Impact and trade-offs
- Your draft stays on this device. Create a project to save an editable file and use the normal downloads.
Builder → bar under the title
Starting points
Templates, Blank drawing, Copy current dieline and Import file choose what the drawing starts from. Templates opens Start with a template, with a search box, a category list, a size in millimetres and a Material choice for the template you pick, and Use linework to copy its lines.
- When it helps most
- Pick the closest template and give it your size before you copy its lines.
- Impact and trade-offs
- Copying a template gives you linework to edit, not the template’s own parametric controls.
Builder → toolbar
Drawing tools
Select, Pan, Line, Connected, Rectangle, Rounded, Circle, Polygon, Arc and Flap, each with a keyboard shortcut shown in its tooltip. Undo and Redo cover drawing changes.
- When it helps most
- Draw the outline first, then crease lines that divide it into panels.
- Impact and trade-offs
- A shape is only a panel when its cut outline is closed.
Builder → Properties → Line type
Line type
Sets what a line is: Cut, Crease, Reverse crease, Perforation, Kiss cut, Cut-crease or Double crease. Apply type to selection changes several lines at once.
- When it helps most
- Mark every line deliberately; panels and hinges are found from these types.
- Impact and trade-offs
- A wrong type makes a wrong panel or fold. Check the legend and the geometry check.
Builder → Flap tool → Flap from edge
Flap from edge
Adds a flap on a selected edge. Flap type offers Plain panel, Glue flap, Tuck flap, Dust flap, Lock tab and Mirror of this panel. Options include Slit locks at the fold ends and Flip to the other side.
- When it helps most
- Use it to build flaps without drawing each line by hand.
- Impact and trade-offs
- The flap is drawn as lines you can still edit afterwards.
Builder → Geometry check
Geometry check
Shows Start drawing, Needs attention or Ready, the number of lines, panels and folds, and messages with a Locate on drawing link.
- When it helps most
- Fix messages until the check is Ready before you continue.
- Impact and trade-offs
- Ready means the shapes are usable. It does not approve the structure for production.
Builder → footer button
Check lines & folds
Hands the drawing to a dialog with a Lines step (line types and checks) and a Folds step (Root panel, Name, Board and a Fold slider), ending in Create project.
- When it helps most
- Use it to confirm the fold in 3D before artwork.
- Impact and trade-offs
- Curved folds remain flat marks in the rigid-panel preview.
Print setup → Size → Size tab, below the style name
Dimensions of a custom project
A custom project that carries a construction recipe shows numeric dimensions you can edit to rebuild its panels and folds. One without a recipe only reports the imported dieline’s size; you change its cut and fold geometry to change its shape.
- When it helps most
- Use the dimension fields when they are offered, and the builder when they are not.
- Impact and trade-offs
- Artwork on whole-dieline or changed-target layers may be moved to Parked after a resize; recover and align it in Artwork.
Print setup → Size → Size tab, under the style name
Imported dieline card: Edit folds, Import another and Draw a custom copy
After Create project, a card shows the file name, its size and panel count, and three buttons: Edit folds to reopen the fold setup, Import another to replace the file, and Draw a custom copy to open the builder with this drawing.
- When it helps most
- Use Edit folds to change the root panel and, for each fold, its angle, its direction (Back folds behind the printed side, Forward toward it) and its Die line. Switching direction swaps Crease and Reverse crease to match; pick another Die line to override it. Quicker still, click a fold line in the Dieline view: the badge that opens has Back and Forward and a Die line picker, and each change is one undo step. Order in the fold bar also has Edit folds, and with a flap selected on the box it opens on that flap’s fold. Use Draw a custom copy to move or redraw lines.
- Impact and trade-offs
- The size is fixed by the file. The card notes that links cannot carry it, so share the project file instead.
Print setup → Size → Size tab → Local formula standard
Local formula standard
Lets you make an imported drawing dimension-driven by marking straight spans that may grow: choose a Starting panel, a Direction (Horizontal or Vertical), set the guide positions in flat millimetres, Add dimension span, then Validate dimension bindings.
- When it helps most
- Use it when you want to resize an imported drawing from numeric fields. Keep tabs, slots and curved details outside the spans so their size stays fixed.
- Impact and trade-offs
- Beyond a span, geometry moves without scaling. Unsupported curves, diagonal folds and complex contours need an authored recipe, and validation explains the feature that needs attention.
Custom dielines page → Request a custom design, or the link in the builder
Request a custom design
Opens the request form for a bespoke structure.
- When it helps most
- Use it when the shape is complex or must follow a specification you cannot draw yourself.
- Impact and trade-offs
- A request starts a conversation. Scope, price and deliverables are agreed separately.
Which start to choose
Start with a template when a catalogue construction is close: you get working panels at a size you chose, and the normal Structure tabs. Start with a blank drawing only when nothing is close. Import a file when a supplier or die maker has already drawn the structure.
A custom project opens in the same editor as a template, so Design → Structure, the Flaps tab, add-ons, the fold bar, artwork and Download all work on it.
Before it goes to production
The builder checks geometry. It does not know your board, grain, glue or machine. Make a paper sample at actual size and confirm the structure and tolerances with your converter before you order tooling.
Check your work
- The outline is closed and the geometry check says Ready.
- Every line has the right type.
- The 3D view folds the way the real pack should.
- A sample at actual size fits the product.
- The converter has confirmed the structure.
Troubleshooting
The geometry check says Needs attention
Read the first message and use Locate on drawing. Close open outlines, remove doubled lines and make sure crease lines meet the outline.
The fold goes through a panel in 3D
Return to Check lines & folds and review the root panel and each hinge’s direction and angle. After Create project, use Print setup → Size → Edit folds.
My draft disappeared
Drafts are kept in this browser on this device. If browser storage is unavailable the builder says so; create a project to keep an editable file.