Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Paperboard can collar dieline
A flat carrier for two, three, four or six cans, with flexible retention tabs and optional finger holes. Prototype the rim fit and loaded strength before production. A parametric template — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside222 × 188 mm
Outside222 × 188 mm
Flat blank222 × 188 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Carrier width 222 · Carrier depth 188 mm
- Size range
- Carrier width 80–400 · Carrier depth 60–280 mm
- Manufacturing
- 222 × 188 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.042 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- Folding boxboard 400 g · 0.6 mm caliper
- Board options
- FBB 400Kraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Cans4 options
- Retention diametermm
- Retention tab depthmm
- Finger holeson / off
- Corner radiusmm
- Plain round holeson / off
- End hand slotson / off
Ready-sized paperboard can collar presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this paperboard can collar yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.