Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Twin-can paperboard collar dieline
Two cans in a single column with a finger strip between them. A ready-sized preset of the paperboard can collar — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside80 × 188 mm
Outside80 × 188 mm
Flat blank80 × 188 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Carrier width 80 · Carrier depth 188 mm
- Size range
- Carrier width 80–400 · Carrier depth 60–280 mm
- Manufacturing
- 80 × 188 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.015 m² · about 33 up on a 720 × 1020 mm sheet
- Default board
- Folding boxboard 400 g · 0.6 mm caliper
- Board options
- FBB 400Kraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Cans4 options
- Retention diametermm
- Retention tab depthmm
- Finger holeson / off
- Corner radiusmm
- Plain round holeson / off
- End hand slotson / off
The paperboard can collar family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this twin-can paperboard collar yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.