Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA B40.20.00.00Trays & lids
Glued-corner tray dieline
Four single walls; the corner flaps of the long walls are glued inside the end walls. A ready-sized preset of the corner-flap tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 200 × 80 mm
Outside306.4 × 203.2 × 81.6 mm
Flat blank466.4 × 363.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA B40.20.00.00
- Inside size
- Length 300 · Width 200 · Height 80 mm
- Size range
- Length 120–800 · Width 80–600 · Height 30–300 mm
- Manufacturing
- 304.8 × 201.6 × 80.8 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.169 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- B-fluteE-flute KE-flute WEB doubleF-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA B40.20.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 304.8 × 201.6 | L + 3T × W + T |
| Front | 304.8 × 80.8 | L + 3T × H + T/2 |
| Back | 304.8 × 80.8 | L + 3T × H + T/2 |
| Left end | 80.8 × 201.6 | W + T × H + T/2 |
| Right end | 80.8 × 201.6 | W + T × H + T/2 |
| Corner flap ×4 | 80.8 × 79.2 | – × H − T/2 |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Corner flaps2 options
- Corner profile2 options
- Hand holeson / off
The corner-flap tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this glued-corner tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.