Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0911Trays & lids
Tray insert, flaps on the ends 380×280×60 dieline
A low tray dropped into a case; corner flaps on its short end walls lie inside the long walls. A ready-sized preset of the corner-flap tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside380 × 280 × 60 mm
Outside386.4 × 292.8 × 63.2 mm
Flat blank506.4 × 412.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0911
- Inside size
- Length 380 · Width 280 · Height 60 mm
- Size range
- Length 120–800 · Width 80–600 · Height 30–300 mm
- Manufacturing
- 383.2 × 289.6 × 61.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.207 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- B-flute shipping · 3.2 mm caliper
- Board options
- B-fluteE-flute KE-flute WEB doubleF-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0911 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (3.2 mm for B-flute shipping). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 383.2 × 289.6 | L + T × W + 3T |
| Front | 383.2 × 61.6 | L + T × H + T/2 |
| Back | 383.2 × 61.6 | L + T × H + T/2 |
| Left end | 61.6 × 283.2 | W + T × H + T/2 |
| Right end | 61.6 × 283.2 | W + T × H + T/2 |
| Corner flap ×4 | 58.4 × 61.6 | H − T/2 × H + T/2 |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Corner flaps2 options
- Corner profile2 options
- Hand holeson / off
The corner-flap tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tray insert, flaps on the ends 380×280×60 yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.