Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA E14.30.00.00Carriers
2-cup self-locking wrap 160×80×95 dieline
No glue: the outer base flap’s tabs lock through the inner one. A ready-sized preset of the cup wrap-around multipack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside160 × 80 × 95 mm
Outside160 × 81 × 96 mm
Flat blank352.1 × 171.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA E14.30.00.00
- Inside size
- Top length 160 · Top width 80 · Height 95 mm
- Size range
- Top length 60–600 · Top width 50–400 · Height 30–300 mm
- Manufacturing
- 160 × 80.5 × 95.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.052 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350GD2 350Kraft 350FBB 400SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA E14.30.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Inner bottom | 28 × 136.7 | – |
| Side ×2 | 96.2 × 160 | – × L |
| Top | 80.5 × 172 | W + T × – |
| Bottom | 39.2 × 136.7 | – |
| Lock tab ×2 | 2 × 25.6 | – |
| Lock tab head ×2 | 10 × 25.6 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Construction5 options
- Cups per rowcount
- Wall slope°
- End taper°
- Rim slot depthmm
- Rim slot lengthmm
- Lid end archmm
- Lock slot offsetmm
- Lock openingmm
- Inner bottom flapmm
The cup wrap-around multipack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 2-cup self-locking wrap 160×80×95 yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.