Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Small rounded gift carrier dieline
A curved-bottom gift carrier made from two shaped faces and a continuous U-shaped side band. The band has bonding tabs for both faces; the arched tops contain aligned carry holes. This is a hand-glued three-piece construction. A ready-sized preset of the curved-base carry carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside100 × 40 × 120 mm
Outside101 × 41 × 121 mm
Flat blank313.9 × 50 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Body width 100 · Inside depth 40 · Body height 120 mm
- Size range
- Body width 80–400 · Inside depth 20–150 · Body height 80–500 mm
- Manufacturing
- 100.5 × 40.5 × 120.5 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front curved carry face, Back curved carry face, U-shaped curved side and base band
- Board area
- 0.042 m² · about 36 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Shaped carry faceFront curved carry face | 100.5 × 148.3 | L + T × – |
| Shaped carry faceBack curved carry face | 100.5 × 148.3 | L + T × – |
| Base wall ×2U-shaped curved side and base band | 102.5 × 40 | – × W |
| Cap bonding tab ×2U-shaped curved side and base band | 102.5 × 5 | – |
| Base wall ×48U-shaped curved side and base band | 2.3 × 40 | – × W |
| Cap bonding tab ×2U-shaped curved side and base band | 2.3 × 3.2 | – |
| Cap bonding tab ×46U-shaped curved side and base band | 2.3 × 5 | – |
| Back-face bonding tab ×2U-shaped curved side and base band | 102.5 × 5 | – |
| Back-face bonding tab ×48U-shaped curved side and base band | 2.3 × 5 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Bottom curve depthmm
- Carry crown heightmm
- Face bonding tabsmm
The curved-base carry carton family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this small rounded gift carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.