Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DOUBLE-DRAWER-01Trays & lids
Opposite-end double drawer dieline
One sleeve with two independent drawer trays: sliding out of opposite ends, or stacked one above the other. A ready-sized preset of the double drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside100 × 220 × 40 mm
Outside105 × 221 × 42.3 mm
Flat blank304 × 220.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DOUBLE-DRAWER-01
- Inside size
- Tray width 100 · Sleeve length 220 · Tray height 40 mm
- Size range
- Tray width 40–400 · Sleeve length 60–600 · Tray height 10–150 mm
- Manufacturing
- 102.5 × 220.5 × 40.3 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Sleeve, Front tray, Rear tray
- Board area
- 0.136 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350GD2 350E-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-DOUBLE-DRAWER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomSleeve | 104.5 × 220.5 | L + 7T + 2c × W + T |
| Left sideSleeve | 41.8 × 220.5 | H + 2.5T + c × W + T |
| TopSleeve | 104.5 × 220.5 | L + 7T + 2c × W + T |
| Right sideSleeve | 41.3 × 220.5 | H + 1.5T + c × W + T |
| Glue flapSleeve | 12 × 220.5 | – × W + T |
| Pose rigFront tray | 100 × 65.6 | – |
| BaseFront tray | 100 × 65.5 | – |
| FrontFront tray | 102.5 × 40.3 | – × H + T/2 |
| BackFront tray | 102.5 × 40.3 | – × H + T/2 |
| Left endFront tray | 40.3 × 109.3 | H + T/2 × – |
| Right endFront tray | 40.3 × 109.3 | H + T/2 × – |
| Corner web ×4Front tray | 40.3 × 40.3 | – × H + T/2 |
| Corner web ×4Front tray | 56.9 × 28.5 | – |
| Pose rigRear tray | 100 × 65.6 | – |
| BaseRear tray | 100 × 65.5 | – |
| FrontRear tray | 102.5 × 40.3 | – × H + T/2 |
5 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Drawers2 options
- Centre gapmm
- Pull4 options
The double drawer box family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this opposite-end double drawer yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.