Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DISPLAY-OUTER-SNAP-01Display
Display outer, snap-lock base dieline
Counter display with header and a hand-locked 1-2-3 base, e.g. for boxed lip balms or sachet cartons. A ready-sized preset of the display outer with header — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 90 × 110 mm
Outside201 × 91 × 111 mm
Flat blank593.5 × 452.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DISPLAY-OUTER-SNAP-01
- Inside size
- Length 200 · Width 90 · Wall height 110 mm
- Size range
- Length 60–450 · Width 30–250 · Wall height 30–300 mm
- Manufacturing
- 200.5 × 90.5 × 110.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.118 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300E-flute WF-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-DISPLAY-OUTER-SNAP-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 200.5 × 110.5 | L + T × H + T |
| Left side | 90.5 × 110.5 | W + T × H + T |
| Back | 200.5 × 110.5 | L + T × H + T |
| Right side | 90 × 110.5 | W × H + T + header |
| Glue flap | 12 × 110.5 | – × H + T |
| Snap end | 90.5 × 30 | W + T × – |
| Snap end | 90 × 30 | W × – |
| Snap bottom | 200.5 × 58.5 | L + T × – |
| Snap tuck | 200.5 × 58 | L + T × – |
| Rim lip ×2 | 198.5 × 16.5 | – |
| Header leaf | 16.6 × 99 | – |
| Header tab | 87.5 × 85.8 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Base2 options
- Front U widthmm
- Front U depthmm
- Header leaf heightmm
- Header tab heightmm
The display outer with header family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this display outer, snap-lock base yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.