Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0606Shipping
Full body-flanged rigid box dieline
Source-specific sleeve and rigid-box constructions with separate printable blanks, specified opening directions and board allowances. A ready-sized preset of the rigid box with separate ends — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside400 × 260 × 150 mm
Outside406.4 × 263.2 × 153.2 mm
Flat blank461.6 × 826.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0606
- Inside size
- Length 400 · Width 260 · Height 150 mm
- Size range
- Length 120–1000 · Width 80–700 · Height 40–500 mm
- Manufacturing
- 401.6 × 261.6 × 151.6 mm score to score · inside vs outside sizes
- Parts
- 3 parts — body, left end, right end
- Board area
- 0.452 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0606 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Bottombody | 401.6 × 261.6 | L + T × W + T |
| frontbody | 401.6 × 151.6 | L + T × H + T |
| backbody | 401.6 × 151.6 | L + T × H + T |
| top frontbody | 401.6 × 130.8 | L + T × – |
| top backbody | 401.6 × 130.8 | L + T × – |
| front left gluebody | 30 × 151.6 | – × H + T |
| front right gluebody | 30 × 151.6 | – × H + T |
| bottom left gluebody | 30 × 261.6 | – × W + T |
| bottom right gluebody | 30 × 261.6 | – × W + T |
| back left gluebody | 30 × 151.6 | – × H + T |
| back right gluebody | 30 × 151.6 | – × H + T |
| top front left gluebody | 30 × 130.8 | – |
| top front right gluebody | 30 × 130.8 | – |
| top back left gluebody | 30 × 130.8 | – |
| top back right gluebody | 30 × 130.8 | – |
| Pose rigleft end | 100 × 35 | – |
3 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Construction9 options
- Glue or tuck depthmm
- 0605 cover depthmm
The rigid box with separate ends family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this full body-flanged rigid box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.