Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0300Trays & lids
Boot box 480×320×130 dieline
Tall-boot box with a 45 mm lid. A ready-sized preset of the telescope box with flap corners — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside480 × 320 × 130 mm
Outside489.4 × 335.8 × 133.2 mm
Flat blank743.2 × 586.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0300
- Inside size
- Length 480 · Width 320 · Height 130 mm
- Size range
- Length 100–1000 · Width 80–800 · Height 30–600 mm
- Manufacturing
- 481.6 × 324.8 × 130.8 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Lid, Base
- Board area
- 0.677 m²
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KB-fluteF-fluteEB double
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0300 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Pose rigLid | 100 × 37.9 | – |
| Lid topLid | 100 × 296.3 | – |
| BackLid | 487.8 × 45.8 | – |
| FrontLid | 487.8 × 45.8 | – |
| Left endLid | 45.8 × 334.2 | – |
| Right endLid | 45.8 × 334.2 | – |
| Corner flap ×4Lid | 44.2 × 45.8 | – |
| BaseBase | 481.6 × 324.8 | L + T × – |
| FrontBase | 481.6 × 130.8 | L + T × H + T/2 |
| BackBase | 481.6 × 130.8 | L + T × H + T/2 |
| Left endBase | 130.8 × 324.8 | H + T/2 × – |
| Right endBase | 130.8 × 324.8 | H + T/2 × – |
| Corner flap ×4Base | 129.2 × 130.8 | H − T/2 × H + T/2 |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Lid corner flaps2 options
- Lid depthmm
The telescope box with flap corners family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this boot box 480×320×130 yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.