Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
Bear character floor display dieline
A character side graphic with a scalloped crown beside four accessible shelves and a white print liner. Approximate starting size: 320 mm shelf opening, 600 mm side width and 1180 mm overall height (1000 mm body plus 180 mm crown). Validate stock, adhesive, stability and load with a physical sample. A ready-sized preset of the floor display — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside320 × 600 × 1000 mm
Outside339.2 × 601.6 × 1180 mm
Flat blank1576.8 × 1601.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Structure
- Floor display
- Inside size
- Width 320 · Depth 600 · Height 1000 mm
- Size range
- Width 250–1000 · Depth 200–600 · Height 900–2000 mm
- Manufacturing
- 321.6 × 601.6 × 1000 mm score to score · inside vs outside sizes
- Parts
- 9 parts — Body, Plinth, Shelf 1, Shelf 2, Shelf 3, Shelf 4, Contour side graphic, Graphic mounting rail 1, Graphic mounting rail 2
- Board area
- 3.991 m²
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- B-fluteEB doubleE-flute WE-flute K
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The bear character floor display erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upRight side, Left side, Kick plate, Plinth back, Shelf lip and 9 more
- 2Fold the corner ears inRight return, Left return, Top flap, Corner flap, Glue to graphic reverse and 5 more
- 3Fold the stripTop, Plinth side, Shelf lip roll, Shelf lip (inside) and 7 more
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BackBody | 321.6 × 1000 | L + T × H |
| Right sideBody | 601.6 × 998.4 | W + T × H − T |
| Left sideBody | 601.6 × 998.4 | W + T × H − T |
| TopBody | 321.6 × 601.6 | L + T × W + T |
| Right returnBody | 26 × 998.4 | – × H − T |
| Left returnBody | 26 × 998.4 | – × H − T |
| Top flap ×2Body | 50 × 595.4 | – |
| Plinth topPlinth | 314.4 × 594.4 | – |
| Kick platePlinth | 314.4 × 100 | L − T − 2c × plinth |
| Plinth backPlinth | 314.4 × 100 | – |
| Plinth side ×2Plinth | 100 × 594.4 | – |
| Corner flap ×4Plinth | 80 × 96.8 | – |
| ShelfShelf 1 | 329.6 × 594.4 | L − T − 2c × shelf depth |
| Shelf lipShelf 1 | 314.4 × 65 | – |
| Shelf lip rollShelf 1 | 311.2 × 3.2 | – |
| Shelf lip (inside)Shelf 1 | 311.2 × 65 | – |
23 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Shelvescount
- Headermm
- Contour side graphic2 options
- Plinthmm
- Shelf lipmm
- Front returnsmm
The floor display family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the bear character floor display dieline fit my product?
A character side graphic with a scalloped crown beside four accessible shelves and a white print liner. Approximate starting size: 320 mm shelf opening, 600 mm side width and 1180 mm overall height (1000 mm body plus 180 mm crown). Validate stock, adhesive, stability and load with a physical sample. The default dimensions in inside-size mode are Width 320 mm, Depth 600 mm, Height 1000 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Width 250–1000 mm, Depth 200–600 mm, Height 900–2000 mm. At the default settings, the editor also exposes Shelves, Header, Contour side graphic, Plinth, Shelf lip, Front returns. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is E-flute white / kraft (1.6 mm caliper). This structure allows B-flute shipping, EB double wall, E-flute white / kraft, E-flute kraft / kraft. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this bear character floor display yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.