Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-FULL-WRAP-01Mailer
String-tie gift box dieline
Square paperboard gift box with two separately cut board buttons on the front lap and wall. Supply the rivets and cord separately; confirm the folded assembly with your converter. A ready-sized preset of the fully wrapped mailer — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside150 × 150 × 150 mm
Outside151 × 152.5 × 152 mm
Flat blank543.6 × 718.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-FULL-WRAP-01
- Structure
- Fully wrapped mailer
- Inside size
- Length 150 · Width 150 · Depth 150 mm
- Size range
- Length 60–600 · Width 40–450 · Depth 3–150 mm
- Manufacturing
- 151 × 152 × 151.5 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Fully wrapped mailer, Button 1, Button 2
- Board area
- 0.180 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350GD2 350SBS 300E-flute KF-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The string-tie gift box erects in 7 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLeft, Right
- 2Fold the corner ears inCorner tab and 3 more
- 3Fold the walls upFront, Back
- 4Fold the dust flaps inSide flap and 1 more
- 5Fold the flapsInner cover
- 6Close the end flapsOuter cover
- 7Tuck the flaps inClosing lap
How the blank is sized
Score-to-score panel sizes of this DM-FULL-WRAP-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BaseFully wrapped mailer | 151 × 152 | L + 2T × W + 4T |
| LeftFully wrapped mailer | 151 × 151 | – |
| Side flap ×2Fully wrapped mailer | 45.3 × 150 | – |
| RightFully wrapped mailer | 151 × 151 | – |
| Corner tab ×4Fully wrapped mailer | 149.5 × 20 | – |
| FrontFully wrapped mailer | 151 × 151.5 | – |
| BackFully wrapped mailer | 151 × 152 | – |
| Inner coverFully wrapped mailer | 149 × 60.8 | – |
| Outer coverFully wrapped mailer | 149 × 152.5 | – |
| Closing lapFully wrapped mailer | 149 × 50 | – |
| ButtonButton 1 | 24 × 23.6 | – |
| ButtonButton 2 | 24 × 23.6 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 11 options; the template and 3D preview follow each change.
- Closure2 options
- Button diametermm
- String woundon / off
- Closing lapmm
- Finger tongueon / off
- Tear stripon / off
- Inner cover depthmm
- Tapered inner coveron / off
- Outer cover depthmm
- Outer cover cornersmm
- Side flap depthmm
The fully wrapped mailer family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the string-tie gift box dieline fit my product?
Square paperboard gift box with two separately cut board buttons on the front lap and wall. Supply the rivets and cord separately; confirm the folded assembly with your converter. The default dimensions in inside-size mode are Length 150 mm, Width 150 mm, Depth 150 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Length 60–600 mm, Width 40–450 mm, Depth 3–150 mm. At the default settings, the editor also exposes Closure, Button diameter, String wound, Closing lap, Finger tongue, Tear strip and 5 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Grey-back duplex 350 g, SBS white board 300 g, E-flute kraft / kraft, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this string-tie gift box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.