Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-HANG-TUCK-01Display
Cable hang box dieline
Hanging window box for cables and small parts. A ready-sized preset of the hang tab box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 25 × 130 mm
Outside91 × 26 × 131 mm
Flat blank243.5 × 245 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HANG-TUCK-01
- Inside size
- Length 90 · Width 25 · Height 130 mm
- Size range
- Length 25–250 · Width 10–150 · Height 20–400 mm
- Manufacturing
- 90.5 × 25.5 × 130.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.047 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400GD2 350Kraft 350Black 350PET 0.3SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-HANG-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 90.5 × 130.5 | L + T × H + T |
| Left side | 25.5 × 130.5 | W + T × H + T |
| Back | 90.5 × 130.5 | L + T × H + T |
| Right side | 25 × 130.5 | W × H + T |
| Glue flap | 12 × 130.5 | – × H + T |
| Top closure | 90.5 × 24.5 | L + T × W − T |
| Top tuck | 89.5 × 12 | L − T × – |
| Top dust flap | 25.5 × 18.5 | W + T × – |
| Top dust flap | 25 × 18.5 | W × – |
| Bottom closure | 90.5 × 24.5 | L + T × W − T |
| Bottom tuck | 89.5 × 12 | L − T × – |
| Bottom dust flap | 25.5 × 18.5 | W + T × – |
| Bottom dust flap | 25 × 18.5 | W × – |
| Hang header | 90.5 × 40 | L + T × – |
| Header back ply | 78.5 × 38 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 14 options; the template and 3D preview follow each change.
- Bottom3 options
- Tuck depthmm
- Slit lockon / off
- Header panel2 options
- Header heightmm
- Header cornersmm
- Hang hole4 options
- Hole from topmm
- Double-ply headeron / off
- Windowon / off
- Window widthmm
- Window heightmm
- Window cornersmm
- Window offsetmm
The hang tab box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this cable hang box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.