Skip to content
DielineMaker
Start designing free
Cut-corner octagon box
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-IRREGULAR-PRISM-TUCK-01Shapes

Cut-corner octagon box dieline

A square tuck box with its four vertical corners chamfered into an octagon, for chocolates, candles and gift sets. A ready-sized preset of the irregular prism tuck tube — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside110 × 110 × 70 mm
Outside111 × 111 × 71 mm
Flat blank414.4 × 334 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-IRREGULAR-PRISM-TUCK-01
Structure
Irregular prism tuck tube
Inside size
Length 110 · Width 110 · Height 70 mm
Size range
Length 30–400 · Width 20–300 · Height 30–500 mm
Manufacturing
110.5 × 110.5 × 70.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.055 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350FBB 400Kraft 350Black 350GD2 350SBS 18 pt
Good for
cut corner boxcut corner box templateoctagon boxchamfered corner boxclipped corner boxelongated hexagon boxlong hexagon boxoctagon tubechamfered boxrhombus box

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Cut-corner octagon box flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 110 × 110 × 70 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

4 per sheet · Prism tube
4 copies of Prism tube on the stock sheet

Not proven optimal: upper bound 12 ups, within 8 ups (66.7 %).

Open in editor with this sheet

How it folds

The cut-corner octagon box erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upWall 2, Wall 3, Dust flap, Wall 4, Wall 5 and 6 more
  2. 2
    Fold the dust flaps inDust flap, Bottom tuck, Glue flap and 3 more
  3. 3
    Tuck the flaps inTop tuck, Bottom lid
  4. 4
    Close the lidTop lid
BackWall 2 · 1Top · 4Wall 3 · 1Wall 4 · 1Front · 1Wall 6 · 1Bottom · 3Wall 7 · 1Wall 8 · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-IRREGULAR-PRISM-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Wall 154 × 70– × H
Wall 239.6 × 70– × H
Top lid54 × 110–
Wall 354 × 70– × H
Dust flap ×436.6 × 26.1–
Top tuck52 × 22–
Wall 439.6 × 70– × H
Dust flap ×451 × 24.8–
Wall 554 × 70– × H
Wall 639.6 × 70– × H
Bottom lid54 × 110–
Wall 754 × 70– × H
Bottom tuck52 × 22–
Wall 839.6 × 70– × H
Glue flap12 × 69– × H − 2T

Adjustable in the editor

Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.

  • Section7 options
  • Chamfer / pointmm
  • Rhomboid slant°
  • Tuck depthmm

The irregular prism tuck tube family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the cut-corner octagon box dieline fit my product?

A square tuck box with its four vertical corners chamfered into an octagon, for chocolates, candles and gift sets. The default dimensions in inside-size mode are Length 110 mm, Width 110 mm, Height 70 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 30–400 mm, Width 20–300 mm, Height 30–500 mm. At the default settings, the editor also exposes Section, Chamfer / point, Rhomboid slant, Tuck depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, Grey-back duplex 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All shapes templates

Make this cut-corner octagon box yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.