

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Grooved triangular prism dieline
A tuck-end tube with an irregular cross-section: elongated hexagon, chamfered octagon, rhombus, rhomboid, trapezoid, triangle, or a triangle with a channel folded into its front face, with matching polygon lids at both ends. A ready-sized preset of the irregular prism tuck tube — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-IRREGULAR-PRISM-TUCK-01
- Structure
- Irregular prism tuck tube
- Inside size
- Length 100 · Width 87 · Height 170 mm
- Size range
- Length 30–400 · Width 20–300 · Height 30–500 mm
- Manufacturing
- 100.5 × 87.5 × 170.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.074 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350GD2 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 100 × 87 × 170 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 5 ups, within 2 ups (40.0 %).
How it folds
The grooved triangular prism erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upWall 2, Wall 3, Wall 4, Wall 5, Wall 6 and 2 more
- 2Fold the dust flaps inDust flap, Bottom tuck, Glue flap
- 3Close the lidBottom lid, Top tuck
- 4Close the lidTop lid
How the blank is sized
Score-to-score panel sizes of this DM-IRREGULAR-PRISM-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Wall 1 | 100.3 × 170 | – × H |
| Wall 2 | 100.3 × 170 | – × H |
| Top lid | 100.3 × 86.7 | – |
| Wall 3 | 39 × 170 | – × H |
| Bottom lid | 100.3 × 86.7 | – |
| Top tuck | 17.4 × 98.3 | – |
| Wall 4 | 30 × 170 | – × H |
| Dust flap ×2 | 36 × 9.4 | – |
| Bottom tuck | 17.4 × 98.3 | – |
| Wall 5 | 22 × 170 | – × H |
| Wall 6 | 30 × 170 | – × H |
| Wall 7 | 39 × 170 | – × H |
| Glue flap | 12 × 169 | – × H − 2T |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Section7 options
- Chamfer / pointmm
- Rhomboid slant°
- Channel widthmm
- Channel depthmm
- Tuck depthmm
The irregular prism tuck tube family
The same structure with sizes, boards and options set for a use.

Preset
Preset
Preset
Preset
Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the grooved triangular prism dieline fit my product?
A tuck-end tube with an irregular cross-section: elongated hexagon, chamfered octagon, rhombus, rhomboid, trapezoid, triangle, or a triangle with a channel folded into its front face, with matching polygon lids at both ends. The default dimensions in inside-size mode are Length 100 mm, Width 87 mm, Height 170 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Length 30–400 mm, Width 20–300 mm, Height 30–500 mm. At the default settings, the editor also exposes Section, Chamfer / point, Rhomboid slant, Channel width, Channel depth, Tuck depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, Grey-back duplex 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this grooved triangular prism yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





