Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-IRREGULAR-PRISM-TUCK-01Shapes
Trapezoid tube dieline
A tuck-end tube with an irregular cross-section: elongated hexagon, chamfered octagon, rhombus, rhomboid or trapezoid, with matching polygon lids at both ends. A ready-sized preset of the irregular prism tuck tube — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 60 × 110 mm
Outside120.9 × 60.9 × 110.9 mm
Flat blank333.2 × 254 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-IRREGULAR-PRISM-TUCK-01
- Inside size
- Length 120 · Width 60 · Height 110 mm
- Size range
- Length 30–400 · Width 20–300 · Height 30–500 mm
- Manufacturing
- 120.5 × 60.5 × 110.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.050 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350GD2 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-IRREGULAR-PRISM-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Wall 1 | 64.6 × 110 | – × H |
| Wall 2 | 72 × 110 | – × H |
| Wall 3 | 64.6 × 110 | – × H |
| Bottom lid | 72 × 60 | – × W |
| Wall 4 | 120 × 110 | L × H |
| Bottom tuck | 118.1 × 12 | – |
| Glue flap | 12 × 109 | – |
| Top lid | 120 × 60 | L × W |
| Top tuck | 70.1 × 12 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Section5 options
- Chamfer / pointmm
- Rhomboid slant°
- Tuck depthmm
The irregular prism tuck tube family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this trapezoid tube yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.