Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
T-shirt / vest plastic bag — large dieline
Two matching face cuts with integral vest handles and side-gusset folds. Dimensions use the full lay-flat face width and height to the handle tops. Extruded-tube conversion and handle load need supplier validation. Film caliper, sealing conditions and carrying strength must match the converter’s specification. A ready-sized preset of the t-shirt / vest plastic bag — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside450 × 650 mm
Outside450 × 650 mm
Flat blank450 × 650 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Lay-flat width 450 · Height to handle tops 650 mm
- Size range
- Lay-flat width 140–650 · Height to handle tops 150–800 mm
- Manufacturing
- 450 × 650 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Front vest face, Back vest face
- Board area
- 0.520 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- White LDPE carrier film · 0.06 mm caliper
- Board options
- White LDPEClear LDPEHDPE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Opened side gusset depthmm
- Seal widthmm
- Preview fill%
- Vest handle depthmm
- Each handle widthmm
- Centre tab in the mouthon / off
The t-shirt / vest plastic bag family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this t-shirt / vest plastic bag — large yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.