Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F10.51.00.00Tuck end
Recessed-end carton dieline
A glued tube whose ends close set back inside the walls: a narrow band past each end crease turns into the tube and the four flaps close across behind it, leaving a clean rim at each end. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 56 × 160 mm
Outside91 × 57 × 183.4 mm
Flat blank305.5 × 317.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F10.51.00.00
- Inside size
- Length (A) 90 · Width (B) 56 · Clear height 160 mm
- Size range
- Length (A) 30–400 · Width (B) 20–300 · Clear height 30–500 mm
- Manufacturing
- 90.5 × 56.5 × 182.9 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.093 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F10.51.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Left side (B) | 56.5 × 182.9 | W + T × – |
| Front (A) | 90.5 × 182.9 | L + T × – |
| Right side (B) | 56.5 × 182.9 | W + T × – |
| Back (A) | 90 × 182.9 | L × – |
| Glue flap | 12 × 182.9 | – |
| Top recess band ×2 | 55.5 × 11.2 | W − T × – |
| Top flap ×2 | 54.5 × 56 | – × W |
| Top recess band | 86.5 × 11.2 | – |
| Top flap | 85.5 × 55 | – × W − 2T |
| Top recess band | 86 × 11.2 | – |
| Top flap | 85 × 55 | – × W − 2T |
| Bottom recess band ×2 | 55.5 × 11.2 | W − T × – |
| Bottom flap ×2 | 54.5 × 56 | – × W |
| Bottom recess band | 86.5 × 11.2 | – |
| Bottom flap | 85.5 × 55 | – × W − 2T |
| Bottom recess band | 86 × 11.2 | – |
1 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Recess depthmm
- Flap depthmm
Ready-sized recessed-end carton presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this recessed-end carton yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.