Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F10.82.00.00Tuck end
Telescopic tube carton dieline
Two glued tubes that slide into each other: the outer one tucks closed at the bottom, the slightly smaller inner one at the top, so the pack adjusts to the product height. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 60 × 140 mm
Outside121 × 61 × 143 mm
Flat blank373.5 × 215 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F10.82.00.00
- Inside size
- Length (A) 120 · Depth (B) 60 · Outer height (H) 140 mm
- Size range
- Length (A) 30–400 · Depth (B) 20–300 · Outer height (H) 30–500 mm
- Manufacturing
- 120.5 × 60.5 × 140.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Outer tube (bottom), Inner tube (top)
- Board area
- 0.129 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F10.82.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Back (A)Outer tube (bottom) | 120.5 × 140.5 | L + T × H + T |
| Left side (B)Outer tube (bottom) | 60.5 × 140.5 | W + T × H + T |
| Front (A)Outer tube (bottom) | 120.5 × 140.5 | L + T × H + T |
| Right side (B)Outer tube (bottom) | 60 × 140.5 | W × H + T |
| Glue flapOuter tube (bottom) | 12 × 140.5 | – × H + T |
| Bottom closureOuter tube (bottom) | 120.5 × 59.5 | L + T × W − T |
| TuckOuter tube (bottom) | 119.5 × 15 | L − T × – |
| Bottom dust flapOuter tube (bottom) | 60.5 × 37.5 | W + T × – |
| Bottom dust flapOuter tube (bottom) | 60 × 37.5 | W × – |
| Pose rigInner tube (top) | 100 × 38.1 | – |
| Back (A)Inner tube (top) | 100 × 102.4 | – |
| Left side (B)Inner tube (top) | 59 × 140.5 | W − 2T × H + T |
| Front (A)Inner tube (top) | 118.5 × 140.5 | – × H + T |
| Right side (B)Inner tube (top) | 58.5 × 140.5 | – × H + T |
| Glue flapInner tube (top) | 12 × 140.5 | – × H + T |
| Top closureInner tube (top) | 118.5 × 58 | – |
3 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Inner tube height (h)mm
- Pulled out bymm
- Tuck depthmm
- Slit lockon / off
Ready-sized telescopic tube carton presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this telescopic tube carton yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.