Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-ROUNDED-END-HINGED-01Trays & lids
Low arched roof with carry slots dieline
A carton with arched end walls and one broad cover hinged from the back that bends over both arches and closes with a front flap. Semicircular or shallower arches; optional carry slots in the roof. A ready-sized preset of the rounded-end carton with curved hinged roof — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside260 × 160 × 90 mm
Outside263.2 × 163.2 × 93.2 mm
Flat blank520 × 552.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-ROUNDED-END-HINGED-01
- Inside size
- Length 260 · Depth 160 · Wall height 90 mm
- Size range
- Length 60–500 · Depth 40–300 · Wall height 20–300 mm
- Manufacturing
- 261.6 × 161.6 × 91.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.186 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- SBS 350FBB 400Kraft 350E-flute KE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-ROUNDED-END-HINGED-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 260 × 160 | L × W |
| Back wall | 260 × 90 | L × H |
| Front wall | 260 × 90 | L × H |
| Left end wall | 129.8 × 160 | – × W |
| Right end wall | 129.8 × 160 | – × W |
| Glue flap ×4 | 15 × 90 | – × H |
| Curved roof | 260 × 18.5 | L × – |
| Curved roof (bend) ×9 | 260 × 18.5 | L × – |
| Front closure flap | 254.8 × 27 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Arch risemm
- Front flapmm
- Glue flapmm
- Carry slots in roofon / off
The rounded-end carton with curved hinged roof family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this low arched roof with carry slots yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.