Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F20.35.00.00Trays & lids
Curved-top box (two piece) dieline
Rounded-end base with a separate curved cover band locked into both long walls. A ready-sized preset of the rounded-end tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside150 × 100 × 50 mm
Outside151 × 101.5 × 101 mm
Flat blank351 × 200.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F20.35.00.00
- Inside size
- Length (A) 150 · Width (B) 100 · Wall height 50 mm
- Size range
- Length (A) 40–500 · Width (B) 30–300 · Wall height 10–250 mm
- Manufacturing
- 150.5 × 100.5 × 50 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Base, Curved cover
- Board area
- 0.088 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F20.35.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BaseBase | 150.5 × 100.5 | L + T × W + T |
| Front wallBase | 150.5 × 50 | L + T × H |
| Back wallBase | 150.5 × 50 | L + T × H |
| Corner ear ×4Base | 49.8 × 50 | – × H |
| Left end wallBase | 100.3 × 100.5 | – × W + T |
| Right end wallBase | 100.3 × 100.5 | – × W + T |
| Pose rigCurved cover | 100 × 60.1 | – |
| Curved top ×20Curved cover | 150.5 × 7.2 | L + T × – |
| Curved topCurved cover | 100 × 60.1 | – |
| Cover (back lap)Curved cover | 150.5 × 22.4 | L + T × – |
| Cover (front lap)Curved cover | 150.5 × 22.4 | L + T × – |
| Lock tab ×2Curved cover | 42.1 × 10 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Construction3 options
- Cover lapmm
- Lock tab widthmm
- Lock tab depthmm
The rounded-end tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this curved-top box (two piece) yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.