Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-ROLL-LID-BUTTONHOLE-01Mailer
Rollover hinged lid with buttonhole dieline
The lid tuck carries a round button tab that locks through a buttonhole in the front. No glue. A ready-sized preset of the self-locking box with lid — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 220 × 100 mm
Outside309.6 × 223.2 × 103.2 mm
Flat blank714.4 × 708.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-ROLL-LID-BUTTONHOLE-01
- Inside size
- Length 300 · Width 220 · Height 100 mm
- Size range
- Length 150–600 · Width 80–450 · Height 20–150 mm
- Manufacturing
- 308 × 221.6 × 101.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.334 m²
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteF-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-ROLL-LID-BUTTONHOLE-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 308 × 221.6 | – × W + T |
| Front | 308 × 100.8 | – × H + T/2 |
| Back | 308 × 101.6 | – × H + T |
| Front ear ×2 | 100 × 96.8 | – × H − 2T |
| Back ear ×2 | 100 × 96.8 | – × H − 2T |
| Left end | 100 × 221.6 | H × W + T |
| Left end roll | 3.2 × 218.4 | – × W − T |
| Left end (inside) | 100 × 218.4 | H × W − T |
| Right end | 100 × 221.6 | H × W + T |
| Right end roll | 3.2 × 218.4 | – × W − T |
| Right end (inside) | 100 × 218.4 | H × W − T |
| Lid | 308 × 219.2 | – × W − T/2 |
| Front tuck | 295.2 × 50 | – |
| Button tab | 47.1 × 15 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Front tuck depthmm
- Lock tonguescount
- Thumb notchon / off
- Notch radiusmm
- Lid lock3 options
The self-locking box with lid family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this rollover hinged lid with buttonhole yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.